Free shipping worldwide from 250 Euro
Hotline +49 9181 509 490

€228.00*

Available, delivery time 1-3 days

Highbeam
Product number: i7900CL
Product information "SL Nano Classic"
The SL Nano Classic for E-Bikes with StVZO-approval to mount on the forkcrown.

700 lumens low beam light up the street without blinding oncoming traffic. The 1000 lumens high beam has a range
of up to 250 m. The remote control is connected to the 52g light lamphead via cable, it allows you to switch between
low beam and high beam. The symbols light green or blue, depending on the mode that is active. The housing is
made from CNC-milled aluminum and therefore especially sturdy, longliving and heat resistant.

The SL Nano is also waterproof and impact resistant according to IK09 and IP67. The lamp switches on automatically
when the motor of the e-bike is started. To switch it off, press and hold the button on the remote control.
_________________
NOTE:
The light cable of the SL Nano has a Shimano connection. Please order the light cable with the appropriate motor connection: Light cable for e-bikes - motor connection (2.0 & 3.0)

Properties "SL Nano Classic"
Bluetooth: without Bluetooth
Colour temperature: 6000 Kelvin
Lampholder: Fork crown
Lamptype: E-Bike light
Lumens: 1000 lumens
Lux: 140 Lux
Measurements: 41x30 mm
Protection class: IP 09 (impact resistance), IP 67 (water resistance)
Range: 250 m
StVZO-approved: Yes (~K1797)
Weight: 52 g
Delivery content "SL Nano Classic"
  • SL Nano Classic with mount
  • Lightcable
  • Wired remote control
  • Screw for remote control
  • 1,5 hex key
  • Stardrive key 15
  • Instructions
Compability "SL Nano Classic"

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Cableguide for light cable
With the self-adhesive cable guide the C14 light cable can be led cleanly from the seat tube to the engine of your e-bike. The soft 3M adhesive pad ensures that the clamp can be easily attached to slightly curved surfaces. The cable guide is also ideal for attaching the cable of the SL remote controls directly to the handlebars.

€5.00*
Screw (wired remote control)
Replacement screw made of stainless steel (M 2x8) to attach the wired remote control to the handlebar.Tool required: hex key 1,5.

€0.20*
Lightcable extension E-Bikes (2.0)
Variant: 2.0
E-bike light cable extension for mounting all e-bike front lights with plug connection. Please select the appropriate extension cable and order the small light cable with motor connection separately: Light cable for e-bikes - motor connection (2.0 & 3.0)________________________________________NOTE:Light cable 1.0: Lamp models up to August 2021 are equipped with a continuous light cable without plug connection. Light cable 2.0: Since August 2021, all light cables on e-bike lights have a plug connection on the light cable, and a small light cable with the matching motor connection.Light cable 3.0: Since March 2024, the plug connection of the e-bike light cable has been changed to a 2-pin coaxial plug connection.

€17.00*
Lightcable connector set
Connection set for rejoining an already separated light cable for e-bikes.The enclosed foam tunnel prevents any rattling in the frame. The two-pole cable connection is waterproof due to its grease filling.

€2.00*
New
Lightcable extension E-Bikes (3.0)
Variant: 3.0
E-bike light cable extension for mounting all e-bike front lights with plug connection. Please select the appropriate extension cable and order the small light cable with motor connection separately: Light cable for e-bikes - motor connection (2.0 & 3.0)________________________________________NOTE:Light cable 1.0: Lamp models up to August 2021 are equipped with a continuous light cable without plug connection. Light cable 2.0: Since August 2021, all light cables on e-bike lights have a plug connection on the light cable, and a small light cable with the matching motor connection.Light cable 3.0: Since March 2024, the plug connection of the e-bike light cable has been changed to a 2-pin coaxial plug connection.

Variants from €17.00*
€18.00*
Lightcable for E-Bikes - motor connection
Motor: Bosch
Short light cable with motor connection and plug connector for mounting an e-bike light on a light cable already laid in the frame. Suitable for lightcable extension 2.0 & 3.0.If a long light cable is also required for the frame, this must be ordered separately. Please ensure the correct plug connection -> see note._________________________________________NOTE: Light cable 1.0: Lamp models up to August 2021 are equipped with a continuous light cable without a plug connection.Light cable 2.0: Since August 2021, all light cables on e-bike lights have a plug connection on the light cable, as well as a small light cable with the matching motor connection.Light cable 3.0: Since March 2024, the plug connection of the e-bike light cable has been converted to a 2-pin coaxial plug connection.

€17.00*
Classicmount SL Nano
With the Classicmount, the SL Nano can be mounted on fork crowns with a hole. An M6 x 35 screw is supplied for mounting.Combined with the classicmount, the wired remote control should have a minimum length of 67cm.

€24.00*