Cable connector for joining together an already separated light cable for e-bikes.The included foam tunnel prevents any rattling in the frame.Waterproof connection due to grease filling.
With the self-adhesive cable guide the C14 light cable can be led cleanly from the seat tube to the engine of your e-bike. The soft 3M adhesive pad ensures that the clamp can be easily attached to slightly curved surfaces. The cable guide is also ideal for attaching the cable of the SL remote controls directly to the handlebars.
Adjustable aluminium bracket for mounting all Lupine lights on the handlebars of your e-bike. Adjustment range from 28mm to 40mm arm length (from handlebar to hole centre).Perfect for thicker stems, Bosch Smartphone Hub or bike computer.
The SL X/AX GoPro adapter for mounting from "below". Perfect in combination with our GoPro Spacer or the GoPro Adapter Universal.Also compatible with SL MiniMax (IMPORTANT: only for housings with double thread)
Connector for joining together an already separated light cable for e-bikes.Waterproof connection due to gel insert.Preferably use the Y connector if a second device (e.g. C14 tail light) is to be connected to a single light cable.
If an quickrelease mount is used, the filler plug does protect the lights second thread.The filler plug is already delivered with all quickrelease mounts!
Double-sided handlebar holder made of glass fibre reinforced polyamide for mounting the SL X on handlebars with 31.8mm diameter.Also compatible with SL MiniMax (IMPORTANT: only for housings with double thread)
The increase enlargement for handlebars with a diameter of 31.8 mm enables the use of a quickrelease in size 35 mm on the thinner tube diameter.Suitable with every quickrelease or barmount.
Handlebar holder for mounting the SL MiniMax or SL X below a Bosch smartphone hub, Garmin, Wahoo or similar. The strong angle of the holder moves the mounting position of the lamp up to 2cm further down.Made of black anodised aluminium and is compatible with the SL X and SL MiniMax. Handlebar diameter: 31.8mmClamp width: 8mm
Wired remote control with high beam in various lengths for out e-bike lights (SL F, SL X and SL Nano). Cable length is measured from lamp to remote control. The remote control is 14 mm wide.
_________________________________________________________________________________
Note:Not compatible with the bluetooth version of the SL Nano.In combination with the Classicmount, a minimum length of 67cm is required.
Lamp holder for the second generation of the Bosch Nyon display (Nyon 2020). For mounting, the pieces of the mount below the handlebars are replaced by the mount for the lamphead.Suitable for SL X and SL MiniMax.Note: The SL MiniMax comes with only one thread as standard, therefore the article for the doublethread upgrade must also be ordered (see "Recommended").
The increase enlargement for handlebars with a diameter of 25.4 mm enables the use of a quickrelease in size 31.8 mm on the thinner tube diameter.Suitable with every quickrelease or barmount.
Short light cable with motor connection and plug connector for mounting an e-bike light on a light cable already laid in the frame. Suitable for lightcable extension 2.0 & 3.0.Please ensure the correct plug connection -> see note._________________________________________NOTE: Light cable 1.0: Lamp models up to August 2021 are equipped with a continuous light cable without a plug connection.Light cable 2.0: Since August 2021, all light cables on e-bike lights have a plug connection on the light cable, as well as a small light cable with the matching motor connection.Light cable 3.0: Since March 2024, the plug connection of the e-bike light cable has been converted to a 2-pin coaxial plug connection.
The Knipex wire stripper strips cables without manual adjustment. The pliers are already adjusted to our e-bike cables (and can still be used on any other type of cable). Compact, handy and lightweight tool for common cable cross sections and insulation materials.Housing: plastic, glass fiber reinforcedBlade: special tool steel, oil-hardened, replaceable
E-bike light cable extension for mounting all e-bike front lights with plug connection. Order the appropriate connection cable separately for the motor connection:Motor Connection Cable for E-Bikes (Frontlight)________________________________________NOTE:Light cable 1.0: Lamp models up to August 2021 are equipped with a continuous light cable without plug connection. Light cable 2.0: Since August 2021, all light cables on e-bike lights have a plug connection on the light cable, and a small light cable with the matching motor connection.Light cable 3.0: Since March 2024, the plug connection of the e-bike light cable has been changed to a 2-pin coaxial plug connection.
E-bike light cable extension for mounting all e-bike front lights with plug connection. Order the appropriate connection cable separately for the motor connection:Motor Connection Cable for E-Bikes (Frontlight)________________________________________NOTE:Light cable 1.0: Lamp models up to August 2021 are equipped with a continuous light cable without plug connection. Light cable 2.0: Since August 2021, all light cables on e-bike lights have a plug connection on the light cable, and a small light cable with the matching motor connection.Light cable 3.0: Since March 2024, the plug connection of the e-bike light cable has been changed to a 2-pin coaxial plug connection.
SL X lamp mount for Aero handlebars from Canyon (Canyon CP10 Aerocockpit CF). Suitable for mounting the SL X(SL AX) with or without bike computer directly under your aero handlebar. The black anodized aluminum holder is mounted with two screws directly to the receptacle below the handlebar. Developed in collaboration with Canyon (https://www.canyon.com), compatible with all Canyon aero cockpits except H11/H36.
With the Classicmount the SL MiniMax (IMPORTANT: only for housings with double thread) and SL X can be mounted on all forks with hole.To attach the mount a Universal GoPro Adapter is included.Note: The wired remote control should have a minimum length of 67cm in combination with the Classicmount.
SL X Twinfix bracket for the Twinfix system from Syntace. Included are the matching steel screws for mounting on the stem clamps of the Twinfix. Compatible with SL X and SL AX
Universal Aero GoPro adapter for mounting on Aero handlebars to create a GoPro mount. The matching counterpart for lamp mounting is available via our accessories - see ‘Recommended’
Wired remote control on Peppi with high beam in various lengths for our e-bike lights (SL F, SL X and SL Nano). Cable length measured from lamp to remote control.The Peppi enables quick and uncomplicated installation. Despite the possible additional support on Shimano brakes, the button can be mounted close to the handle. With the additionally available Peppi V5 XL, the remote control can also be attached to racing bike handlebars or handlebars with a larger diameter.The width of the Peppi is 13.4mm, the dimensions of the remote control are 20x25x7mm. The remote control can be replaced with the plug on the cable itself.
_________________________________________________________________________________
Note:Not compatible with the bluetooth version of the SL Nano.In combination with the Classicmount, a minimum length of 67cm is required.
We will not be in the office on May 10 due to the bridge day. If you have any questions about orders, please send an e-mail to info@lupine.de. Our service will be available again as usual on Monday.
This website uses cookies to ensure the best experience possible. More information...
