FrontClick helmet mount with 3M adhesive pad for mounting on full-face, ski and safety helmets.The helmet holder has a height of 8.5mm (incl. adhesive pad).
The FrontClick helmet mount with hhok&loop for helmets with ventilation slots.The straps are simply fed through the ventilation slots and the lamp is simply clicked into the holder. An EPDM pad ensures a non-slip grip on the helmet.
Cable connector for joining together an already separated light cable for e-bikes.The included foam tunnel prevents any rattling in the frame.Waterproof connection due to grease filling.
Piko FrontClick mount for attaching the lamp head to a headband or helmet mount.With the FrontClick system, a quick, tool-free change of the lamp from the helmet to the headband is possible.The matching FrontClick counterpart is required for mounting.
The new mount perfectly places the Rotlicht below the saddle. By the push of a button you easily unlock it and charge your Rotlicht if necessary.
With the mount you get a small hexkey, which you need for the initial setup.
Battery helmetmount for attachment to helmets with air vents. Suitable for all FastClick batteries (2.0Ah and 3.5Ah) in combination with the Neo, Piko or Blika lampheads. To mount, pass the hook&loop tape through the ventilation slots, thread the ends through the eyelets on the holder and fasten.
Tail light cable for installing the C14 on an e-bike-motor.Including lightcable connector set with sealing gel for water resistance. Cable-length: 13 cm
The FrontClick handlebar holder completes our FrontClick quick change system and allows a quick and tool-less mounting of all FrontClick lamps (except Alpha) on the handlebars. The holder itself is made of glass fiber reinforced polyamide and is fixed to the handlebars with two screws. Distance between the clamps: 50mm
To install the backpack mount, unscrew the original mount.
Make sure the rubber inlay is placed accurately in the plastic part. Attach the new mount by using the original screws.Note: Due to its weight, we do not recommend using the Rotlicht MAX with the Backpack mount.
With the self-adhesive cable guide the C14 light cable can be led cleanly from the seat tube to the engine of your e-bike. The soft 3M adhesive pad ensures that the clamp can be easily attached to slightly curved surfaces. The cable guide is also ideal for attaching the cable of the SL remote controls directly to the handlebars.
FastClick battery helmet holder incl. 3M Duallock. With the 3M Duallock, the battery holder can be easily removed from the helmet at any time. The battery itself is simply, securely and quickly clicked into the shell.
The battery holder can be mounted instead of the bottle holder. Our HardCase and SmartCore batteries can now be mounted without hook&loop strap.Depending on the position of the bottle cage, the use of an extensioncable may be necessary.
Adjustable aluminium bracket for mounting the SL/SLF on the handlebars of your e-bike. Adjustment range from 28mm to 40mm arm length (from handlebar to hole centre). Perfect for thicker stems, Bosch Smartphone Hub or bike computer. Handlebar diameter chooseable: 31.8mm/35mm
FrontClick headband in various colours with FastClick system. Suitable for Neo, Piko and Blika lampheads.If the headlamp is used with a 6.9 Ah battery (or larger), the battery holder at the back of the head is replaced by the cable guide and the battery is stored in the backpack.If necessary, the top band can also be separated from the headband.
Quickrelease mount for the models Neo, Piko and Blika for mounting on bars with fitting diameter. It is made of CNC-milled, black anodised aluminium.The rubber pad prevents scratches and ensures a firm hold.Distance from the mounting hole of the holderscrew to the edge approx. 20mm, clamp width 8mm.
Peppi V5 XL handlebar holder with EPDM insert for best grip, compatible with all Lupine remote controls.Maximum bar diameter: 32mm, width: 16.4mm, strap length: 85mm.
Matt black retaining screws for mounting the lamphead on the FrontClick holder or quick release/clamp. Suitable for: Neo, Piko, Blika, Wilma, SL Mono, SL Nano, SL Nano AF, SL F, SL AF, SL MiniMax, SL MiniMax AF
Lupine Spacer with GoPro mount: 10mm high, inner diameter: 1 1/8 inches, aluminum black anodized, incl. M4 locking screw.Not compatible with the original GoPro mount. An adapter is also required for lamp mounting.
Coated battery strap with a length of 30cm suitable for pipes with a diameter of up to 75 mm.A silicone anti-slip coating on the inside of the Velcro strap prevents the battery from slipping.
With the USB Charger, Lupine batteries with 7.2V system (except the Alpha battery) can be charged with up to 1.5A charging current on end devices with a USB connection. For example, on a PC or via the USB power supply of a smartphone - also suitable for solar panels.
To put the bluetooth remote control at your wrist or backpack strap. If you want to put th remote control on a handlebar, the so called Peppi V4 or V5 is the better choice.
New generation, breathable material and FrontClick-mount for Neo, Piko, Blika, Wilma and Betty. Lamphead is mounted via FrontClick, backpart is suitable for all FastClick batteries but can be re-equipped with a cable routing to lead your battery in your backpack.
We will not be in the office on May 10 due to the bridge day. If you have any questions about orders, please send an e-mail to info@lupine.de. Our service will be available again as usual on Monday.
This website uses cookies to ensure the best experience possible. More information...
_400x400.jpg)
