Battery:
6.9 Ah batterytank
|
Handlebar diameter:
31.8 mm
The new version of the SL AX: Now with up to 3800 lumens of high beam and improved light pattern. The StVZO-approved bike light comes with high beam, low beam and daytime running light function, external battery and Bluetooth remote control.The brightness sensor of the SL AX detects darkness and automatically switches from daytime running light to lowbeam, simultaneously releasing the highbeam. The ladder has a range of up to 370m and provides best visibility outside the city and on trails. If the lowbeam is activated, the Bluetooth remote control can be used to switch to highbeam and back again. With the "Peppi" holder, it is securely attached next to the handlebar. The lamphead is mounted next to the stem with the CNC-machined aluminium quickrelease mount, the battery is attached on the bike frame with the hook&loop strap. The batteries have a capacity indicator (SmartCore) and a maximum runtime of up to 20h (6.9Ah), 28h (10.0Ah) or 40h (13.8Ah), depending on the model selected. The housing of the SL AX is also made of CNC-milled and then black anodised aluminium and is particularly durable, sturdy and heatresistant. The SL AX is also both impact and water resistant according to IK09 and IP68.
The Betty TL2 S has a luminosity of up to 5400 lumens, a power of 0.3 - 45W and differs from the BTL2 only in the battery capacity. The small set does not contain any charging devices.One charge of the built-in 3.5Ah battery lasts up to 30 hours. The batterytank can be separated from the lamphead sothat the battery can be exchanged if necessary (also for the larger 6.9Ah or 10.4Ah battery). The total 11 light levels of theBetty TL2 S range from 0.3 to 45W. In addition, it has a 0.8W red light function, SOS, and a flash function.Like every Lupine lamp, the Betty TL2 S is impact- and waterresistant according to IK09 and IP68.
Brake light:
With brake light
|
Diameter seat clamp:
38.6 mm
The C14 rear light from Lupine is the first rear light for e-bikes that is integrated into the saddle clamp and approved by the StVZO. NEW: Now optionally with brake light function. Due to a G-sensor, the C14 detects when braking and lights up brighter for a short time. The 45 lumen rear light is made of black anodised CNC-milled aluminum, the lens of robust polycarbonate. The C14 is impact-resistant and can withstand heavy splashes of water (IPX6). Though COB technology and Fresnel lenses, the C14 achieves high visibility in road traffic while reducing glare. The special arrangement of the 14 LEDs and a sophisticated lens system also create a particularly homogeneous lighting characteristic. The C14 is inherently compatible with Shimano motors. Included in the delivery are 3 cable guides for attaching the cable to the bicycle frame.___________________________________________________________________________________Note:For installation on Bosch, Brose and Yamaha motors, please also order the appropriate adapter cable. The light cable on the C14 is 1 metre long, the adapter cables are 13 cm long.
The C14 SP taillight for e-bikes as a seatpost version.
NEW: Now optionally with brake light function. Due to the G-sensor, the C14 detects braking and lights up brighter for a short time.
The 45 lumens rear light is made of black anodised CNC-machined aluminium, the optics of robust polycarbonate. The C14 SP is waterproof and impact resistant according to IP68 and IK09. Due to the latest COB technology and powerful Fresnel lenses, the C14 SP achieves all-round high visibility while reducing glare. The special arrangement of the 14 LEDs and a sophisticated lens system also create a particularly homogeneous light characteristic.
The C14 SP is connected directly to the motor of the e-bike and is compatible with all current e-MTBs. An adapter cable is required for installation on Bosch, Brose and Yamaha motors. This has a length of 13 cm. The C14 SP is StVZO-approved and has a mounting width of 50mm.
The delivery includes inlays to increase the circumference from 31.6 to 30.9 mm. The two-piece clamp of the C14 SP allows for quick and easy installation without having to dismantle the seat post.
The C14 red light for e-bikes as a luggage carrier version.
NEW: Now optionally with brake light function. Due to the G-sensor, the C14 detects braking and lights up brighter for a short time.The 45-lumen taillight is made of black anodised CNC-machined aluminium, the optics of robust polycarbonate. The C14 G is impact-resistant and waterproof according to IPX6. Thanks to the latest COB technology and powerful Fresnel lenses, the C14 G achieves all-round high visibility with reduced glare. The special arrangement of the 14 LEDs and a sophisticated lens system also create a particularly homogeneous light characteristic. The C14 G is connected directly to the motor of the e-bike and is compatible with all current e-MTBs. An
adapter cable is required for installation on Bosch, Brose and Yamaha motors. This has a length of 13 cm. The C14 G is StVZO-approved and has a mounting width of 50mm.
The SL Mono is our first bikelight with integrated battery, StVZO-approved and easy to charge via USB-C port.It has a daytime running light with 150 lumens, two levels of low beam with 450 and 700 lumens and a brightness sensor, which automatically activates the low beam in the dark. Thanks to the quick-release mounting on the handlebar, the lamp can be removed within seconds without tools. The housing and the quick-release are made of CnC-milled and then black anodised aluminium. The built-in 12Wh battery has a charging time of 3.5 hours and a maximum runtime of 2 hours in low beam or 16 hours in daytime running light. The SL Mono is water- and impact-resistant according to IK09 and IP68. As with all our lamps, we do not glue the housing to ensure long-term reparability and the replacement of individual parts.
The C14 Mag is the first taillight with an innovative magnetic mount. The 45 lumen rear light with brake light and brightness sensor is held by a bracket on the seat post. Simply place the strap around the tube and hook it onto the other side.The integrated rechargeable battery is fully charged within 3 hours with the enclosed magnetic charging cable and has a runtime of up to 22 hours. The C14 Mag impresses with its homogeneous light characteristic and guarantees good all-round visibility - even from the side.
Like all Lupine lamps, the C14 Mag is waterproof and impact resistant according to IP68 and IK09.
The SL AF international version with active LED ring in daytime running light, up to 1000 lumens glarefree low beam and up to 1300 lumens high beam, external battery and Bluetooth remote control. The SL AF is mounted with the quick release made of Cnc-milled aluminum. The battery is attached to the top or bottom tube of the frame with the enclosed coated hook&loop strap. In the dark the lamp switches automatically from daytime running light to low beam and releases the high beam. With the Bluetooth remote control can then be switched between low beam, high beam and the various light levels. The remote control is attached to the handlebar with the Peppi holder.The SL AF is also available as an alternate version for Canyon Aero handlebars and Megaforce 2 and Flatforce stems from Syntace (TwinFix).
The SL Nano AF is a small, lightweight StVZO-approved bicycle lamp with 1100 lumens high beam, 700 lumenslow beam, daytime running light function, external battery and Bluetooth remote control.The SL Nano AF is mounted with the quick release. The battery is attached to the top or bottom tube of the frame with the enclosed coated hook&loop strap. In the dark the lamp switches automatically from daytime running light to low beam. The remote control can then be used to switch between low and high beam and is mounted to the handlebar with the Peppi holder.
The SL AF Canyon StVZO - special variant for mounting on the Canyon Aero handlebar.With StVZO approval, daytime running light, up to 1000 lumens low beam and up to 1300 lumens high beam, externalBattery and Bluetooth remote control. Suitable for mounting with or without bike computer. The black anodizedAlumium holder is mounted with two screws directly to the receptacle below the handlebar. Developed inCooperation with Canyon, compatible with all Canyon aero cockpits except H11/H36. Conversion to mounting with quick release is possible. The 6.9 Ah SmartCore battery is attached with the enclosed coated hook&loop strap to the top or bottom tube of the frame.The lamp switches automatically in the dark from daytime running light to low beam and releases the high beam. With the bluetooth remote control can then be switched between low beam, high beam and the different light levels. The remote control is attached to the handlebar with the Peppi holder.
The SL Nano AF Canyon - special mount for attaching on Canyon Aero handlebars. Developed in Cooperation with Canyon, compatible with all Canyon aero cockpits except H11/H36. Conversion to mounting with quick release is possible. The SL Nano AF is a small, lightweight StVZO-approved bicycle lamp with 1100 lumens high beam, 700 lumens low beam, daytime running light function, external battery and Bluetooth remote control.The SL Nano AF is mounted with the quick release. The 5.0 Ah SmartCore battery is attached to the top or bottom tube of the frame with the enclosed coated velcro tape. In the dark the lamp switches automatically from daytime running light to low beam. The remote control can then be used to switch between low and high beam and is mounted to the handlebar with the Peppi holder.
The C14 Mag is the first taillight with an innovative magnetic mount. The 45 lumen rear light has a brake light and a brightness sensor. In contrast to the StVZO-approved version, the international version is equipped with two additional light modes: flashing and pulse mode.The C14 Mag is inserted into the holder between the saddle rails and held there with pure magnetic force. Like the housing, it's made of CNC-milled aluminium. The integrated battery is fully charged within 3 hours with the included magnetic charging cable and has a runtime of up to 22 hours. The C14 Mag impresses with its homogeneous light characteristic and guarantees all-round good visibility - even from the side. Like all Lupine lamps, the C14 Mag is waterproof and impact-resistant according to IP68 and IK09. The minimum distance between saddle and saddle rails for mounting is 21mm. For mounting on carbon saddles two longer retaining screws are included in the delivery. The C14 Mag is compatible with all standardised standardised seat post spacing (approx. 35mm).
The SL X is with up to 1800 lumens of high beam currently our brightest StVZO-approved e-bike light. 900 lumens low beam ensure optimal visibility without blinding oncoming traffic. Out of town, the high beam illuminates the road or trail for up to 290m. As soon as the brightness sensor detects darkness, the SL X automatically switches from daytime running light to low beam. At the same time, the high beam can be activated with the remote control. It is connected to the lamphead via cable and is secured next to the handle with a screw. The symbols indicate by green or blue light whether you are in low beam or high beam. In addition to the factory setting, the SL X can be set to individual programs. The black anodised housing made of CNC-milled aluminium is particularly robust, durable and heat-resistant. The SL X is also water- and impact resistant according to IK09 and IP68.Lightcable with plug connection:Light cable length 96,5cm (80cm+16,5cm), with the cable on the spotlight gives a total length of 1,33m.
________________________________________________________________________________
Note:
- Giant-variants only compatible with Syncdrive Pro 2 engines.
- From August 2021, our E-Bike lamps will have a plug connection on the light cable. Lamp models until August/2021 won't be supplied with a plug connection, please order the appropriate light cable without plug connection here. ->
Lightcable without plug connection
/
Lightcable with plug connection
The SL X is with up to 1800 lumens of high beam currently our brightest StVZO-approved E-bike light. For mounting on a Bosch Intuvia/Nyon display a holder is included, which replaces the bottom part of the displaymount.900 lumens low beam ensure optimal visibility without blinding oncoming traffic. Out of town, the high beam illuminates the road or trail for up to 290m. As soon as the brightness sensor detects darkness, the SL X automatically switches from daytime running light to low beam. At the same time, the high beam can be activated with the remote control. It is connected to the lamphead via cable and is secured next to the handle with a screw. The symbols indicate by green or blue light whether you are in low beam or high beam. In addition to the factory setting, the SL X can be set to individual programs. The black anodised housing made of CNC-milled aluminium is particularly robust, durable and heat-resistant. The SL X is also water- and impact resistant IK09 and IP68.
______________________________________________________________________________________Note:The Bosch Nyon display can in combination with the SL X only be mounted in the central mounting direction. Front mounting is not possible.
The SL F for e-bikes with up to 1300 lumen high beam and StVZO approval.900 lumens low beam ensure optimum visibility without blinding oncoming traffic. Out of town the high beam illuminates the road or trail for up to 210m. As soon as the brightness sensor detects darkness, the SL F automatically switches from daytime running light to low beam. At the same time, the high beam can be activated with the remote control, which is connected to the lamphead via a cable and is fastened with a screw next to the handle. The symbols indicate by green or blue light whether you are in low beam or high beam. In addition to the factory setting, the SL F can be set to individual programs. The housing made of black anodised and CNC-milled aluminum is particularly robust, durable and heatresistant.The SL F is mounted securely next to the stem with a clamp mount - also made of CNC-milled aluminum. That way the lamphead sits centrally on the handlebar and ensures optimal illumination. The SL F is also waterproof and impact resistant according to IK09 and IP68.____________________________________________________________________________________Note:
Our e-bike lights are supplied with a plug connection and lightcable set since August 2021. Older models are equipped with a long lightcable without a plug. When reordering, please pay attention to the the right lightcable: -> Lightcable without plug connection
/
Lightcable with plug connection
Lightcable with plug connection:Light cable length 96,5cm (80cm+16,5cm), with the cable on the spotlight gives a total length of 1,33m.
The SL F for e-bikes with up to 1300 lumens high beam, glare-free low beam and daytime running light function. With the included wired remote control you can switch between low and high beam in a flash. The lamp comes including light cable and two holder arms made of fiberglass-reinforced polyamide (please select the appropriate handlebar diameter and motor).Note: This is the SL F with two threads for mounting with the two included bracket arms or the optional Classic Mount.
The SL F for e-bikes with up to 1300 lumens high beam and StVZO approval. For mounting on a Bosch Intuvia/Nyon display, a bracket is included that replaces the bracket clip underneath the display. The 900 lumens low beam ensures optimum visibility without blinding oncoming traffic. Out of town, the high beam illuminates the road or trail for up to 210m. As soon as the brightness sensor detects darkness, the SL F automatically switches from daytime running light to low beam. At the same time, the high beam can be activated with the remote control. It is connected to the lamp head via cable and is mounted with a screw next to the handle. The symbols indicate by green or blue light whether the light runs in low beam or high beam. In addition to the factory setting, the SL F can be set to individual programs. The housing made of black anodised and CNC-milled aluminum is particularly sturdy, durable and heat-resistant. The SL F is also waterproof and impact-resistant according to IK09 and IP68.
Handlebar diameter:
31.8 mm
|
Highbeam:
Wired remote control
The SL Nano for E-Bikes with up to 900 lumens high beam and StVZO-approval. 600 lumens low beam light up the street without blinding oncoming traffic. In high beam, the lamp has a range of up to 230 m. The remote control is connected to the 52g light lamphead via cable, it allows you to switch between low beam and high beam. The symbols light green or blue, depending on the mode that is active. The light is mounted to the handlebar with a holder made of CNC-milled and black anodised aluminium. The housing is also made from the same material and therefore especially sturdy, longliving and heat resistant. The SL Nano is also waterproof and impact resistant according to IK09 and IP68.____________________________________________________________________________________Note:- Connection cable on the lamp compatible with Shimano motors - for Bosch, Brose and Yamaha please select thelight cable with the matching motor -> Lightcable with plug connection
The SL Nano Canyon is compatible with the e-mountainbikes of the "On"-series by Canyon.The lamphead is now supplied with a light cable, no longer with a USB-C connection.The lamps features include daytime running light, 600 lumens low beam, 900 lumens high beam and Bluetooth remote control. The SL Nano Canyon is either available for the CP12 Carbon cockpit or the classic round handlebar stem combination.
The SL Nano for Newmen stems with 600 lumen low beam and StVZO approval. Without high beam, daytime running light and brightness sensor.Instead of the usual handlebar mount, the lamphead is held in position by a bracket between the handlebar and the stem clamps. The housing, also made of CNC-milled and black anodised aluminium, is particularly sturdy, durable and heat-resistant.The SL Nano is also waterproof and impact-resistant according to IK09 and IP68.
__________________________________________________________________________________
Note:
Compatible with all Evolution 31.4 stems by Newmen. The light cable of the SL Nano is compatible with Shimano motors. Installation on Bosch, Brose or Yamaha motors requires an additional lightcable with motor connection.
Find more Newmen accessiores> here <
The SL Nano in the Newmen Kit consisting of the lamp head (with wired remote control), stem and matching stem clamps. 600 lumens of low beam and 900 lumens of high beam out of a lamp that weighs just 52g.The small StVZO-approved headlight comes optionally with a wired remote control that can be used to switch between high and low beam. The SL Nano Newmen is held directly on the stem by two special stem clamps.Connection cable compatible with Shimano motors - for Bosch, Brose and Yamaha please also order the matching light cable and possibly Scotchlok connectors.
The SL Nano Classic for E-Bikes with StVZO-approval to mount on the forkcrown. 600 lumens low beam light up the street without blinding oncoming traffic. The 900 lumens high beam has a range of up to 230 m. The remote control is connected to the 52g light lamphead via cable, it allows you to switch between low beam and high beam. The symbols light green or blue, depending on the mode that is active. The housing is made from CNC-milled aluminum and therefore especially sturdy, longliving and heat resistant. The SL Nano is also waterproof and impact resistant according to IK09 and IP68.___________________________________________________________________________Note: - Connection cable on the lamp compatible with Shimano motors - for Bosch, Brose and Yamaha please select the light cable with the matching motor -> Lightcable with plug connection
Display:
Nyon
|
Highbeam:
Bluetooth remote control
The SL Nano RF for e-bikes for mounting on your Intuvia or Nyon display. The holder is compatible with the Bosch Nyon display (2nd generation, from 2020). To mount the lamp, replace the lower left clamp of the Bosch display with the SL Nano holder.The SL Nano has a 600 lumen low beam and 900 lumen high beam. Please note that if a matching Bosch plug is required on the light cable, this must be ordered separately.-> Light cable with plug connection (Bosch)
The new Alpha with stunning 8100 lumens is the improved version of the most powerful lamp we have ever built. With a range of up to 480 metres, it illuminates its surroundings perfectly and brings light into the dark in every situation. The Alphas brightness is increased due to the revised heat connection, which improves the dimming behaviour and allows it to run at full power for longer than before. With the help of the included remote control, you can easily switch between the different light levels and control them via app. The LED bar on the back of the lamp indicates the lightmode on which the Alpha is running. The 6.9 Ah battery of the Alpha is carried in the backpack with the included extension cable. With the SmartCore function, the battery shows how much capacity is left, but also has several signal light functions. The 14.4V battery was specially developed for the Alpha and is the only Lupine battery that is not compatible with any other lamphead.As all Lupine lamps, the Alpha is waterproof and shock resistant according to IP69 and IK09.
The new Alpha with stunning 8100 lumens is the improved version of the most powerful bike light we have ever built. With a range of up to 480 metres, it illuminates the trail perfectly and turns every bike into the ultimate nighttime racing machine.The Alpha owes its brightness to the new XML-3 LEDs and the revised heat connection. Thus, the current Alpha is not only brighter but also maintains its performance significantly longer than before.With the included remote control, you can easily switch between the different light levels and control them via app. The LED bar on the back of the lamp indicates the lightmode on which the Alpha is running.The 6.9 Ah battery of the Alpha can be attached to the frame with the included hook&loop strap. With the SmartCore function, the battery shows how much capacity is left, but also has several signal light functions. The 14.4V battery was specially developed for the Alpha and is the only Lupine battery that is not compatible with any other lamphead.Like all lamps, the Alpha is waterproof and impact resistant according to IP69 and IK09.
The Blika with 2400 lumens in a practical All-in-One-Set. Choosing between head- or helmetlamp is no longer necessary here.Cable length at lamphead approx. 25cm.The packet contains the lamphead, headband, helmetmount, battery, bluetooth remote control, charger and instructions.Due to the FrontClick system, the lamphead can easily be switched from headband to helmet (with air vents) and vice versa.The 3.5 Ah battery is worn by the FastClick system directly on the headband or helmet. The SmartCore functionshows how much capacity is left in the battery, provides a signal light feature an has improved battery management.
The Piko with 2100 lumens in a practical All-in-One-Set. Choosing between head- or helmetlamp is no longer necessary here.Cable length at lamphead approx. 25cm.The packet contains the lamphead, headband, helmetmount, battery, bluetooth remote control, charger and instructions.Due to the FrontClick system, the lamphead can easily be switched from headband to helmet (with air vents) and vice versa.The 3.5 Ah battery is worn by the FastClick system directly on the headband or helmet. The SmartCore functionshows how much capacity is left in the battery, provides a signal light feature an has improved battery management.
The Penta is a compact headlamp with up to 1100 lumens, diffuse camping light, two red lights with different beam characteristics and numerous lighting functions. The housing of the Penta is made of black anodised aluminium. Two buttons on the upper side of the lamp allow easy control of all lighting functions. The lamp has an integrated battery and can be charged via USB-C.
Note: The optional color temperature "neutral white" gives the Penta a slightly warmer light. Warmer light is especially suitable for use in snow and fog, while the colder "daylight" appears subjectively brighter and helps you stay awake longer.
The 1000 lumen Neo headlamp is our smallest lamp and only weighs around 50g.The lamp head comes with the Lupine FrontClick system and can be easily converted to a helmet or another headband.The aluminium housing has active heat management for maximum efficiency. The Neo offers a red light function, fivedifferent light levels (0.3W/40 lumens - 10W/1000 lumens), SOS, RVLR and alpine emergency signal. Cable length at lamphead 25cm.The 3.5 Ah battery supplies the lamp with power for up to 80 hours (2.0 Ah up to 48 hours) and is also attached to the helmetusing the FastClick system. In addition to the battery size, you can also choose between HardCase and SmartCore.Alternatively, it can be stowed in a backpack with a longer cable.Like all Lupine lamps, the Neo is both waterproof and shockproof according to IP68 and IK09.
Battery:
25 Wh / 3.5 Ah SmartCore
|
Headband:
Black
The 1000 lumen Neo headlamp is our smallest lamp and only weighs around 50g.The lamp head comes with the Lupine FrontClick system and can be easily converted to a helmet or another headband.The aluminium housing has active heat management for maximum efficiency. The Neo offers a red light function, fivedifferent light levels (0.3W/40 lumens - 10W/1000 lumens), SOS, RVLR and alpine emergency signal.Cable length at lamphead approx. 25cm.The 3.5 Ah battery supplies the lamp with power for up to 80 hours (2.0 Ah up to 48 hours) and is also attached to the helmetusing the FastClick system. In addition to the battery size, you can also choose between HardCase and SmartCore.Alternatively, it can be stowed in a backpack with a longer cable.Like all Lupine lamps, the Neo is both waterproof and shockproof according to IP68 and IK09.
Bluetooth:
with remote control
|
Battery:
25 Wh / 3.5 Ah SmartCore
The Piko helmetlamp with powerful 2100 lumens and diffuse reading light. With the help of the FrontClick system, you can mount the lamphead on the helmet in a second and change it easily without tools. The helmet holder for air vents is threaded through the helmet with the straps and the holder plate is placed on the top of the helmet. The FastClick holder for the battery is mounted on the back of the helmet. The battery is pushed into the holder and clicks into place. Due to its size and weight, the 6.9 Ah battery is connected to the lamphead via an extension cable and stored in the backpack. The SmartCore batteries have a capacity indicator and several signal light functions. With the optional Bluetooth remote control, you can easily control the lamp wirelessly at the touch of a button without having to take your hands off the handlebar. At the same time, you can use the Lupine Light Control 2.0 app to program and control the Piko according to your preferences. Like all Lupine lamps, the Piko is waterproof and impactresistant according to IK09 and IP68.________________________________________________________________________________Note:Neither Bluetooth nor App can be retrofitted to the Piko. Cable length at the head approx. 25cm.
Bluetooth:
with remote control
|
Battery:
25 Wh / 3.5 Ah SmartCore
|
Headband:
Black
The Piko with 2100 lumens, diffused reading and camping light, Bluetooth remote control and app.The lamphead comes with the Lupine FrontClick system and can be easily converted to a helmet or anotherheadband. The aluminum housing has improved thermal management for maximum efficiency. The Piko offers a diffused light function, six different light levels (0.3W/50 lumens - 20W/2100 Lumen), SOS, RVLR as well as alpine emergency signal. Cable length at lamphead approx. 25cm.The battery is also attached to the headband by the FastClick system. Here you can choose between HardCase and SmartCore batteries. Because of its size and weight, the large 6.9 Ah battery is stowed in the backpack.Instead of a FastClick mount, the headband here has a cable guide in the back. As all Lupine lamps, the Piko is both water- and impact resistant according to IP68 and IK09.___________________________________________________________________________________
Note: If Bluetooth is selected, the lamp is delivered with a Bluetooth remote control and the option to use theLupine Light Control App. Neither Bluetooth nor app can be retrofitted.