Cable connector for joining together an already separated light cable for e-bikes.The included foam tunnel prevents any rattling in the frame.Waterproof connection due to grease filling.
With the self-adhesive cable guide the C14 light cable can be led cleanly from the seat tube to the engine of your e-bike. The soft 3M adhesive pad ensures that the clamp can be easily attached to slightly curved surfaces. The cable guide is also ideal for attaching the cable of the SL remote controls directly to the handlebars.
Adjustable aluminium bracket for mounting all Lupine lights on the handlebars of your e-bike. Adjustment range from 28mm to 40mm arm length (from handlebar to hole centre).Perfect for thicker stems, Bosch Smartphone Hub or bike computer.
Connector for joining together an already separated light cable for e-bikes.Waterproof connection due to gel insert.Preferably use the Y connector if a second device (e.g. C14 tail light) is to be connected to a single light cable.
The increase enlargement for handlebars with a diameter of 31.8 mm enables the use of a quickrelease in size 35 mm on the thinner tube diameter.Suitable with every quickrelease or barmount.
Lamp holder for the second generation of the Bosch Nyon display (Nyon 2020). For mounting, the pieces of the mount below the handlebars are replaced by the mount for the lamphead.Suitable for SL X and SL MiniMax.Note: The SL MiniMax comes with only one thread as standard, therefore the article for the doublethread upgrade must also be ordered (see "Recommended").
The increase enlargement for handlebars with a diameter of 25.4 mm enables the use of a quickrelease in size 31.8 mm on the thinner tube diameter.Suitable with every quickrelease or barmount.
Short light cable with motor connection and plug connector for mounting an e-bike light on a light cable already laid in the frame. Suitable for lightcable extension 2.0 & 3.0.Please ensure the correct plug connection -> see note._________________________________________NOTE: Light cable 1.0: Lamp models up to August 2021 are equipped with a continuous light cable without a plug connection.Light cable 2.0: Since August 2021, all light cables on e-bike lights have a plug connection on the light cable, as well as a small light cable with the matching motor connection.Light cable 3.0: Since March 2024, the plug connection of the e-bike light cable has been converted to a 2-pin coaxial plug connection.
The Knipex wire stripper strips cables without manual adjustment. The pliers are already adjusted to our e-bike cables (and can still be used on any other type of cable). Compact, handy and lightweight tool for common cable cross sections and insulation materials.Housing: plastic, glass fiber reinforcedBlade: special tool steel, oil-hardened, replaceable
E-bike light cable extension for mounting all e-bike front lights with plug connection. Order the appropriate connection cable separately for the motor connection:Motor Connection Cable for E-Bikes (Frontlight)________________________________________NOTE:Light cable 1.0: Lamp models up to August 2021 are equipped with a continuous light cable without plug connection. Light cable 2.0: Since August 2021, all light cables on e-bike lights have a plug connection on the light cable, and a small light cable with the matching motor connection.Light cable 3.0: Since March 2024, the plug connection of the e-bike light cable has been changed to a 2-pin coaxial plug connection.
E-bike light cable extension for mounting all e-bike front lights with plug connection. Order the appropriate connection cable separately for the motor connection:Motor Connection Cable for E-Bikes (Frontlight)________________________________________NOTE:Light cable 1.0: Lamp models up to August 2021 are equipped with a continuous light cable without plug connection. Light cable 2.0: Since August 2021, all light cables on e-bike lights have a plug connection on the light cable, and a small light cable with the matching motor connection.Light cable 3.0: Since March 2024, the plug connection of the e-bike light cable has been changed to a 2-pin coaxial plug connection.
Universal Aero GoPro adapter for mounting on Aero handlebars to create a GoPro mount. The matching counterpart for lamp mounting is available via our accessories - see ‘Recommended’
Wired remote control in a length of 29cm for our e-bike lighting SL MiniMax. Cable length measured from the lamp to remote control. The inner diameter of the clamp is 22mm.The button is mounted uncomplicated next to the handlebar grip and fixed with a screw.
Wired remote control for the e-bike lights SL Nano with high beam and SL MiniMax.The remote control clamp with a diameter of 31.8mm is mounted directly next to the stem.Cable length approx. 10cm_____________________________________________________________________________________Note:
Not compatible with the Bluetooth version of the SL Nano. We can also supply the lamp in this configuration ex works on request. You can retrofit the remote control yourself, but we will also be happy to do this for you if required. To do this, fill out the repair form and send in the lamp.Also compatible with the SL X and SL F. Please contact our service department in advance.
Display holder that can be mounted on aero handlebars, with integrated GoPro mount on the bottom side,selectable with matching Garmin or Wahoo mount.Our SL Grano can be mounted directly, other lamp models are mounted using theappropriate Lupine GoPro adapter (not included).Made of CNC drilled black anodized aluminium, weight 30 grams.
We will not be in the office on May 10 due to the bridge day. If you have any questions about orders, please send an e-mail to info@lupine.de. Our service will be available again as usual on Monday.
This website uses cookies to ensure the best experience possible. More information...
