SL F for E-Bikes

Product information "SL F for E-Bikes"

The SL F for e-bikes with up to 1300 lumens high beam, glare-free low beam and daytime running light function.
With the included wired remote control you can switch between low and high beam in a part of a second.
The lamp comes with light cable and CNC-machined handlebar mount (please select the appropriate version).

Lightcable with plug connection:
Light cable length 80cm, with the cable on the spotlight gives a total length of 116,5cm.

Properties "SL F for E-Bikes"

Bluetooth:	with wired remote control
Colour temperature:	6000 Kelvin
Lampholder:	Fixed handlebar clamp
Lamptype:	E-Bike light
Lumens:	1300 lumens
Lux:	110 Lux
Measurements:	49x50x48 mm
Motor:	Bosch, Bosch BES3, Brose, Giant, Shimano, Yamaha
Protection class:	IP 09 (impact resistance), IP 67 (water resistance)
Range:	210 m
StVZO-approved:	Yes (~K1552)
Voltage range:	5V - 15V
Weight:	100g

Delivery content "SL F for E-Bikes"

Lamphead SL F
Handlebarmount made of CNC-milled aluminum
Wired remote control
Lightcable set with plug connection
O-rings and screws
Star drive key 6 und 15
Manual

Compability "SL F for E-Bikes"

Check compatibilty >

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Be the first to share your insights.

Lightcable for E-Bikes (1.0)

Motor: Bosch

140 cm light cable for mounting all SL E-bike headlights. Please select the appropriate motor type.

€17.00*

Details

Lightcable connector set

Connection set for rejoining an already separated light cable for e-bikes.The enclosed foam tunnel prevents any rattling in the frame. The two-pole cable connection is waterproof due to its grease filling.

€2.00*

Details

Knipex wire stripper

The Knipex wire stripper strips cables without manual adjustment. The pliers are already adjusted to our e-bike cables (and can still be used on any other type of cable). Compact, handy and lightweight tool for common cable cross sections and insulation materials.Housing: plastic, glass fiber reinforcedBlade: special tool steel, oil-hardened, replaceable

€27.00*

Details

SL F barmount

Handlebar diameter: 31.8 mm | Stem: V50 (50-60 mm)

Barmount for mounting the SL F E-bike light permanently to the handlebar.It is made of CNC-milled and black anodised aluminum and compatible with stems of 50-60mm width.

€20.00*

Details

SL F mount (both sided)

Handlebar diameter: 31.8 mm

Two-sided handlebar bracket for mounting the two-thread variant of the SL F on handlebars with 31.8mm diameter. Also compatible with all two-thread variants of the SL S, and SL A and SL AF.Clamp width: 5.3mm

€12.00*

Details

SL F mount Bosch Intuvia/Nyon

Display: Nyon

SL F holder for the second generation of the Bosch Nyon display (Nyon 2020). For mounting, the holder halves below the handlebar are replaced by the SL F holder.

Variants from €12.00*

€15.00*

Details

SL F/AF GoPro Adapter

Size: M

Recommendation:If the holder is mounted frontally (horizontal), we recommend the "S".For mounting upside-down (vertical), we recommend version"M".The adapter in version "L" allows completely flexible mounting. The lamp head of the SL AF can be rotated completely. Arm length (back stop to middle screw):Version L: approx. 42 mmVersion M: approx. 35 mmVersion S: approx. 22 mm

€15.00*

Details

SL F barmount

Handlebar diameter: 31.8 mm | Stem: Standard (40-50 mm)

Barmount for mounting the SL F E-bike light permanently to the handlebar. It is made of CNC-milled and black anodised aluminum and compatible with stems of 40-50mm width.

€20.00*

Details

SL F mount (both sided)

Handlebar diameter: 35 mm

Two-sided handlebar bracket for mounting the two-thread variant of the SL F on handlebars with 35mm diameter. Also compatible with all two-thread variants of the SL S, and SL A and SL AF.Clamp width: 5.3mm

€12.00*

Details

New

Lightcable extension E-Bikes (3.0)

Variant: 3.0

E-bike light cable extension for mounting all e-bike front lights with plug connection. Please select the appropriate extension cable and order the small light cable with motor connection separately: Light cable for e-bikes - motor connection (2.0 & 3.0)________________________________________NOTE:Light cable 1.0: Lamp models up to August 2021 are equipped with a continuous light cable without plug connection. Light cable 2.0: Since August 2021, all light cables on e-bike lights have a plug connection on the light cable, and a small light cable with the matching motor connection.Light cable 3.0: Since March 2024, the plug connection of the e-bike light cable has been changed to a 2-pin coaxial plug connection.

Variants from €17.00*

€18.00*

Details

Lightcable extension E-Bikes (2.0)

Variant: 2.0

€17.00*

Details

Lightcable for E-Bikes - motor connection

Motor: Bosch

Short light cable with motor connection and plug connector for mounting an e-bike light on a light cable already laid in the frame. Suitable for lightcable extension 2.0 & 3.0.If a long light cable is also required for the frame, this must be ordered separately. Please ensure the correct plug connection -> see note._________________________________________NOTE: Light cable 1.0: Lamp models up to August 2021 are equipped with a continuous light cable without a plug connection.Light cable 2.0: Since August 2021, all light cables on e-bike lights have a plug connection on the light cable, as well as a small light cable with the matching motor connection.Light cable 3.0: Since March 2024, the plug connection of the e-bike light cable has been converted to a 2-pin coaxial plug connection.

€17.00*

Details