Free shipping worldwide from 250 Euro
Hotline +49 9181 509 490

€350.00*

Available, delivery time 1-3 days

Handlebar diameter
Motor
Product number: i6150BES3
Product information "SL F for E-Bikes"
The SL F for e-bikes with up to 1300 lumen high beam and StVZO approval.

900 lumens low beam ensure optimum visibility without blinding oncoming traffic. Out of town the high beam
illuminates the road or trail for up to 210m. As soon as the brightness sensor detects darkness, the SL F automatically
switches from daytime running light to low beam. At the same time, the high beam can be activated with the
remote control, which is connected to the lamphead via a cable and is fastened with a screw next to the handle.
The symbols indicate by green or blue light whether you are in low beam or high beam. In addition to the factory
setting, the SL F can be set to individual programs. The housing made of black anodised and CNC-milled
aluminum is particularly robust, durable and heatresistant.

The SL F is mounted securely next to the stem with a clamp mount - also made of CNC-milled aluminum.
That way the lamphead sits centrally on the handlebar and ensures optimal illumination. The SL F is also waterproof
and impact resistant according to IK09 and IP68.

____________________________________________________________________________________
Note: Our e-bike lights are supplied with a plug connection and lightcable set since August 2021. Older models are
equipped with a long lightcable without a plug. When reordering, please pay attention to the the right lightcable:
-> Lightcable without plug connection / Lightcable with plug connection


Lightcable with plug connection:
Light cable length 96,5cm (80cm+16,5cm), with the cable on the spotlight gives a total length of 1,33m.

Properties "SL F for E-Bikes"
Bluetooth: with wired remote control
Colour temperature: 6000 Kelvin
Lampholder: Fixed handlebar clamp
Lamptype: E-Bike light
Lumens: 1300 lumens
Lux: 110 Lux
Measurements: 49x50x48 mm
Motor: Bosch, Bosch BES3, Brose, Giant, Shimano, Yamaha
Protection class: IP 09 (impact resistance), IP 68 (water resistance)
Range: 210 m
StVZO-approved: Yes (~K1552)
Voltage range: 5V - 15V
Weight: 100g
Delivery content "SL F for E-Bikes"
  • Lamphead SL F
  • Handlebarmount made of CNC-milled aluminum
  • Wired remote control
  • Lightcable set with plug connection
  • O-rings and screws
  • Star drive key 6 und 15
  • Manual
Compability "SL F for E-Bikes"

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Lightcable for E-Bikes
Motor: Bosch
140 cm light cable for mounting all SL E-bike headlights. Please select the appropriate motor type.

Variants from €12.00*
€14.00*
Lightcableset for E-Bikes (plug connection)
Motor: Bosch | Set: Large
E-bike light cable set with motor connection for mounting all e-bike front lights with plug connection. Please select the appropriate motor type._____________________________________________________________________________________Hinweis: Lamp models from August 2021 are equipped with a plug connection on the light cable. If a light cable is required for older modelsplease order the appropriate Lightcable without plug connection here.Light cable length 16.5 cm, together with the cable on the headlamp and the light cable in the frame this gives a total length of 1.33m.

Variants from €11.00*
€15.00*
Lightcable connector set
Connection set for rejoining an already separated light cable for e-bikes.The enclosed foam tunnel prevents any rattling in the frame. The two-pole cable connection is waterproof due to its grease filling.

€2.00*
Scotchlok Y connector
Scotchlok Y-connector set for mounting on the e-bike.With the Scotchlok connector, a light cable can be separated and rejoined. If necessary, a second device (e.g. the C14 tail light) can be parallel connected via the Y-connection. Waterproof due to gel insert.

€2.00*
Knipex wire stripper
The Knipex wire stripper strips cables without manual adjustment. The pliers are already adjusted to our e-bike cables (and can still be used on any other type of cable). Compact, handy and lightweight tool for common cable cross sections and insulation materials.Housing: plastic, glass fiber reinforcedBlade: special tool steel, oil-hardened, replaceable

€27.00*
SL F barmount
Handlebar diameter: 31.8 mm | Stem: V50 (50-60 mm)
Barmount for mounting the SL F E-bike light permanently to the handlebar.It is made of CNC-milled and black anodised aluminum and compatible with stems of 50-60mm width.

€18.00*
SL F mount (both sided)
Handlebar diameter: 31.8 mm
Two-sided handlebar bracket for mounting the two-thread variant of the SL F on handlebars with 31.8mm diameter. Also compatible with all two-thread variants of the SL S, and SL A and SL AF.Clamp width: 5.3mm

€12.00*
SL F mount Bosch Intuvia/Nyon
Display: Nyon
SL F holder for the second generation of the Bosch Nyon display (Nyon 2020). For mounting, the holder halves below the handlebar are replaced by the SL F holder.

Variants from €12.00*
€15.00*
SL F/AF GoPro Adapter
Size: M
Recommendation:If the holder is mounted frontally (horizontal), we recommend the "S".For mounting upside-down (vertical), we recommend version"M".The adapter in version "L" allows completely flexible mounting. The lamp head of the SL AF can be rotated completely. Arm length (back stop to middle screw):Version L: approx. 42 mmVersion M: approx. 35 mmVersion S: approx. 22 mm

€15.00*
SL F barmount
Handlebar diameter: 31.8 mm | Stem: Standard (40-50 mm)
Barmount for mounting the SL F E-bike light permanently to the handlebar. It is made of CNC-milled and black anodised aluminum and compatible with stems of 40-50mm width.

€18.00*
SL F mount (both sided)
Handlebar diameter: 35 mm
Two-sided handlebar bracket for mounting the two-thread variant of the SL F on handlebars with 35mm diameter. Also compatible with all two-thread variants of the SL S, and SL A and SL AF.Clamp width: 5.3mm

€12.00*