Free shipping worldwide from 250 Euro
Hotline +49 9181 509 490

€931.00*

Available, delivery time 1-3 days

Headband
Battery
Product number: i1950-002
Product information "Betty Headlamp"

The Betty headlamp with 5400 lumens, Bluetooth remote control and app control.

The lamp head comes with the Lupine FrontClick system and can be easily converted to a helmet or other headband.
The aluminium housing has improved heat management for maximum efficiency. The Betty offers eleven different
light levels (0.3W/30 lumens - 45W/5400 lumens), Flash, SOS, and centre LED. Cable length at lamphead 25cm.

The cable runs via a cable guide at the back of the head into the backpack, where the battery is stowed.
Because of their size and weight, the 6.9 Ah and 13.8 Ah batteries are not attached to the headband.

The lightset includes a remote control and the optional use of the Lupine Light Control App.

Like all Lupine lamps, the Betty is both waterproof and shockproof according to IP67 and IK09.

Properties "Betty Headlamp"
Battery Holder: 6.9 Ah with Extension, 13.8 Ah with Extension
Bluetooth: App Control, with Bluetooth Remote Control
Charging Time: 3:40 h (6.9 Ah), 7:20 h (13.8 Ah)
Colour Temperature: 6000 Kelvin (daylight)
Lamp Holder: FrontClick, Headband
Lumens: 5400 lumens
Luminous Duration: 1 h (6.9 Ah), 2 h (13.8 Ah)
Luminous Duration (max.): 150 h (6.9 Ah), 310 h (13.8 Ah)
Lux: 320 Lux
Maximum Head Girth: 75 cm
Measurements: 55x44 mm
Protection Class: IP 09 (impact resistance), IP 67 (water resistance)
Range: 360 m
Weight: 150g
Weight (Battery included): 390g (6.9 Ah), 580g (13.8 Ah)
Delivery content "Betty Headlamp"
  • Lamphead Betty R
  • Bluetooth Remote Control
  • Bracelet mount for Remote Control
  • 13.8 Ah SmartCore Battery
  • Headband
  • 120 cm Extension Cable
  • Charger "Charger One"
  • 12 V Cable
  • Pouch L
  • Manual

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Lupine Beanie
Colour: Black
Lupine microfibre beanie by Myrtle Beach, Thinsulate Insulation 3M.Size: One Size

€17.00*
USB One
The USB One can be used to charge devices with an USB charging cable on a Lupine battery (smartphone, red light, Penta, etc).To do this, connect the USB One between the charging cable and the battery.Note:It is not possible to charge a Lupine battery using the combination of USB One, USB Charger and another battery.

€22.00*
Headband FrontClick Wilma/Betty
Headband with FrontClick for Wilma and Betty.Extra wide band for maximum comfort and support. Backside with cableguide.   

€32.00*
HD FrontClick headband
New generation, breathable material and FrontClick-mount for Neo, Piko, Blika, Wilma and Betty. Lamphead is mounted via FrontClick, backpart is suitable for all FastClick batteries but can be re-equipped with a cable routing to lead your battery in your backpack.

€36.00*
3M FrontClick helmetmount
FrontClick helmet mount with 3M adhesive pad for mounting on full-face, ski and safety helmets.The helmet holder has a height of 8.5mm (incl. adhesive pad).

€10.00*
Helmetmount FrontClick
The FrontClick helmet mount with hhok&loop for helmets with ventilation slots.The straps are simply fed through the ventilation slots and the lamp is simply clicked into the holder. An EPDM pad ensures a non-slip grip on the helmet.

€12.00*
FrontClick mount (Mtb- and Skigoggles)
Lights with FrontClick mount can be attached to the side of the helmet or directly to the strap of the MTB goggle or ski goggles with this holder.Four silicone pads prevent slipping on the helmet and a special nub structure on the inside promises the best hold on the strap.We recommend not using the holder with the Alpha for weight reasons. Maximum strap width: 42 mm

€10.00*
FrontClick Barmount
Handlebar Diameter: 31.8 mm
The FrontClick handlebar holder completes our FrontClick quick change system and allows a quick and tool-less mounting of all FrontClick lamps (except Alpha) on the handlebars. The holder itself is made of glass fiber reinforced polyamide and is fixed to the handlebars with two screws. Distance between the clamps: 50mm

€23.00*
Cableguide headband Wilma/Betty
New type for easier removing and installing of the lamphead. The bigger clip for the Wilma and Betty headband attachs the cable to the headband.

€1.00*
6.9 Ah SmartCore Battery
SmartCore battery with LED display with a capacity of 6.9 Ah/50Wh.This 240g battery can be used with all our battery lamps exept Alpha. A short and a long hook&loop strap with anti-slip coating are included for attaching the battery to the bicycle frame, for example.Dimensions: 79 x 41 x 48mm. Cable length at battery approx. 12cm.

€149.00*
13.8 Ah SmartCore Battery
SmartCore battery with LED display with a capacity of 13.8 Ah/99Wh.This battery weighs 430g and can be used with all our battery lamps. For attaching the battery e.g. to the bicycle frame, a short and a long Hook&loop strap with anti-slip coating are included. Dimensions: 146x41x48 mm. Cable length at battery approx. 12cm.

€249.00*
FrontClick mount Betty
Betty FrontClick mount for attaching the lamp head to a headband or helmet mount.With the FrontClick system, a quick, tool-free change of the lamp from the helmet to the headband is possible.The matching FrontClick counterpart is required for mounting.

€8.00*
New
USB Charger
With the USB Charger, Lupine batteries with 7.2V system (except the Alpha battery) can be charged with up to 1.5A charging current on end devices with a USB connection. For example, on a PC or via the USB power supply of a smartphone - also suitable for solar panels.

€26.00*
Betty Quickrelease mount
Handlebar Diameter: 31.8 mm
Betty quickrelease for mounting on bars with fitting diameter. It is made of CNC-milled, black anodised aluminium. The rubber pad prevents scratches and ensures a firm hold.Distance from the mounting hole of the holderscrew to the edge approx. 30mm, clamp width 8mm.

€34.00*
Bracelet mount for remote control
To put the bluetooth remote control at your wrist or backpack strap. If you want to put th remote control on a handlebar, the so called Peppi V4 or V5 is the better choice.

€8.00*
Betty diffuser
Diffuser for Betty made of tempered float glass for pleasant soft light. The lid is made of matte black anodized aluminum.To assemble, simply unscrew the old lid and screw on the new lid.

€21.00*
Betty R frontcap
The frontcap with the new anti reflection coating offers a higher lumens output.

€25.00*
LEDs Neutralwhite (4900K)
Suitable for: Betty
When purchasing a new lamp, it can be equipped with neutral white 4900 Kelvin LEDs if required. To do this, select the appropriate lamp model and order the item at no extra cost.

€0.00*
Betty R Diffuser
Diffuser for our Betty made of tempered float glass for pleasant soft light. The lid is made of matte black anodized aluminum.To assemble, simply unscrew the old lid and screw on the new lid.

€23.00*