The SL Nano Canyon RF is compatible with the e-mountainbikes of the "On"-series by Canyon from delivery date  August 2021.The lamps features include daytime running light, 600 lumens low beam, 900 lumens high beam and Bluetooth remote control. The SL Nano Canyon RF is either available for the CP12 Carbon cockpit or the classic round handlebar stem combination.

The SL F for e-bikes with up to 1300 lumens high beam, glare-free low beam and daytime running light function. With the included wired remote control you can switch between low and high beam in a flash. The lamp comes including light cable and two holder arms made of fiberglass-reinforced polyamide (please select the appropriate handlebar diameter and motor).Note: This is the SL F with two threads for mounting with the two included bracket arms or the optional Classic Mount.

The SL F for e-bikes with up to 1300 lumens high beam, glare-free low beam and daytime running light function. With the included wired remote control you can switch between low and high beam in a part of a second. The lamp comes with light cable and CNC-machined handlebar mount (please select the appropriate version).Note: From August 2021, our E-Bike lamps will have a plug connection on the light cable.Lamp models until August/2021 won't be supplied with a plug connection, please order the appropriate light cable without plug connection here.Lightcable without plug connectionLightcable with plug connectionLightcable with plug connection:Light cable length 96,5cm (80cm+16,5cm), with the cable on the spotlight gives a total length of 1,33m.

With its 1800 lumens the SL X for E-Bikes is the most powerful StVZO lamp approved in Germany.The lamp with daytime running light, low beam and high beam provides glare-free light and visibility in road traffic andunrestricted visibility off road and on trails. Via the sensor, the SL X automatically switches from daytime running light tolow beam. With the cable remote control it can be switched between low and high beam. The buttons on the remote control (that was specifically designed for e-bikes) shine green and blue (low and high beam). As all Lupine lamps, the SL X is water and impact resistant according to IK09 and IP68. Note: From August 2021, our E-Bike lamps will have a plug connection on the light cable.Lamp models until August/2021 won't be supplied with a plug connection, please order the appropriate light cable without plug connection here.Lightcable without plug connection Lightcable with plug connection Lightcable with plug connection:Light cable length 96,5cm (80cm+16,5cm), with the cable on the spotlight gives a total length of 1,33m.

The SL Nano for e-bikes for mounting on your Intuvia or Nyon display.The holder is compatible with the Bosch Intuvia/Nyon display (1st generation). To mount the lamp, replace the bottom left clamp of the Bosch display with the SL Nano holder.The SL Nano has a 600 lumen low beam and 900 lumen high beam. Please note that if a matching Bosch plug is required on the light cable, this must be ordered separately.-> Light cable with plug connection (Bosch)

The seatpost version of our C14 taillight for e-bikes. The 45 lumens strong taillight is made of black anodized CNC machined aluminum, the optics of robust polycarbonate. The C14 SP is impact resistant and waterproof to IP86 and IK09. Due to the latest COB technology and powerful Fresnel lenses, the C14 SP achieves all-round high visibility while reducing glare. The special arrangement of the 14 LEDs and a sophisticated lens system also create a homogeneous lighting characteristic. The C14 SP is connected directly to the motor of the e-bike and is compatible with all current E-MTBs. Installation on Bosch, Brose and Yamaha motors requires an adapter cable. These cables have a length of 13 cm each. The C14 SP is StVZO-approved and has a mounting width of 50mm.Delivery contains inlays for girth extension from 31,6 to 30,9 mm. The two-piece clamp of the C14 SP allows for quick and easy installation without having to dismantle the seat post.

The C14 from Lupine is the first StVZO-approved taillight for e-bikes to be integrated into the saddle clamp.The 45 lumen rear light is made of black anodized CNC machined aluminum, the optics is made of robust polycarbonate.The C14 is impact resistant and withstands strong splash water (IPX6). Through COB technology and Fresnel-lenses the C14 achieves high visibility in road traffic while reducing glare. The special arrangement of the 14 LEDs and asophisticated lens system also create a homogeneous lighting characteristic.The C14 is inherently compatible with Shimano motors. Installation on Bosch, Brose and Yamaha motors requires an Adapter cable. The light cable attatched to the C14 is 1 meter long, the adapter cables are 13 cm in length.The delivery includes 3 cable guides to attach the cable to the bike frame.

The SL X for E-Bikes for Intuvia and Nyon displays. A bikelight with up to 1800 lumens high beam, low beam and daytime running light. Also included: A wired remote control for your handlebar.

The  SL F is directly integrated into the Intuvia/Nyon and Nyon 2 display from Bosch: 1300 lumens high beam, glare-free low beam and daytime running light function. With the help of the wired remote control, you can switch back and forth between low and high beam at lightning speed.

The SL Nano E-Bike light with 600 lumens low beam and 900 lumens high beam. The lightweight lamp is attached directly to the handlebars with a two-piece aluminum bracket clamp. Note: From August 2021, our E-Bike lamps will have a plug connection on the light cable.Lamp models until August/2021 won't be supplied with a plug connection, please order the appropriate light cable without plug connection here.Lightcable without plug connectionLightcable with plug connection IMPORTANT!Connection cable compatible with Shimano engines - please choose the respective cabletype for Bosch, Brose and Yamaha (and Scotchlok connectors if nescessary) Light cable with plug connection:Bosch/Brose/Yamaha: Light cable length 96.5cm (80cm + 16.5 cm), with the cable on the headlight this gives a total length of 1.33m.Shimano: Light cable length 80cm, with the cable on the headlight this results in a total length of 116.5cm.

The SL Nano directly integrated into your Newmen stem. 600 lumen low beam and 900 lumen high beam come out of the only 52g light bulb. The small StVZO-compliant headlamp comes with a wired remote control, with which you can switch between high and low beam. The SL Nano Newmen is held by two special stem clamps directly on the stem. Compatible with all Evolution 31.4 stems from Newmen. Important:Connection cable compatible with Shimano engines - for Bosch, Brose and Yamaha please order the appropriate light cable (and possibly Scotchlok connectors). Note: You can find suitable stems and stem clamps for existing stems here

The rack version of our C14 taillight for e-bikes.The 45 lumens strong taillight is made of black anodized CNC machined aluminum, the optics of robust polycarbonate. The C14 G is impact resistant and waterproof to IPX6.Due to the latest COB technology and powerful Fresnel lenses, the C14 G achieves all-round high visibility while reducing glare. The special arrangement of the 14 LEDs and a sophisticated lens system also create a homogeneous lighting characteristic.The C14 G is connected directly to the motor of the e-bike and is compatible with all current E-MTBs. Installation on Bosch, Brose and Yamaha motors requires an adapter cable. These cables have a length of 13 cm each.The C14 G is StVZO-approved and has a mounting width of 50mm.

The SL Nano Classic for mounting on the crown of the fork. 600 lumens glare-free low beam and 900 lumens high beam. The SL Nano is connected directly to the motor of your e-bike and is StVZO approved. The high beam version includes a wired remote control with 67cm length, with which you can easily switch between low and high beam. IMPORTANT!Connection cable compatible with Shimano engines - for Bosch, Brose and Yamaha please order the appropriate light cable (and possibly Scotchlok connectors)

Before ordering please check out the technical requirements on your E-Bike. Installation: To connect the E-Bike to your light, you eventually will need a light cable. If there is no cable, the cable must be put through your bikeframe.        The light cable is not included with the light! Even more important the light socket of your drives needs get unlocked.        This can be done by a lisenced Bosch dealer or Bosch service.