E-bike light cable set with motor connection for mounting all e-bike front lights with plug connection. Please select the appropriate motor type._____________________________________________________________________________________Hinweis: Lamp models from August 2021 are equipped with a plug connection on the light cable. If a light cable is required for older modelsplease order the appropriate Lightcable without plug connection here.Light cable length 16.5 cm, together with the cable on the headlamp and the light cable in the frame this gives a total length of 1.33m.
SL Nano holder made of CNC-milled aluminium for mounting on the Bosch Kiox/Kiox300 display. For mounting, the holder is clamped between the handlebar bracket and the display mounting plate.
Wired remote control on Peppi with high beam in various lengths for our e-bike lights (SL F, SL X and SL Nano). Cable length measured from lamp to remote control.The Peppi enables quick and uncomplicated installation. Despite the possible additional support on Shimano brakes, the button can be mounted close to the handle. With the additionally available Peppi V5 XL, the remote control can also be attached to racing bike handlebars or handlebars with a larger diameter.The width of the Peppi is 13.4mm, the dimensions of the remote control are 20x25x7mm. The remote control can be replaced with the plug on the cable itself.
_________________________________________________________________________________
Note:Not compatible with the bluetooth version of the SL Nano.In combination with the Classicmount, a minimum length of 67cm is required.
With the Classicmount, the SL Nano can be mounted on fork crowns with a hole. An M6 x 35 screw is supplied for mounting.Combined with the classicmount, the wired remote control should have a minimum length of 67cm.
Connection set for rejoining an already separated light cable for e-bikes.The enclosed foam tunnel prevents any rattling in the frame. The two-pole cable connection is waterproof due to its grease filling.
SL Nano mount for the second generation of the Bosch Nyon display (Nyon 2020). For mounting, the holder halves below the handlebar are replaced by the SL Nano holder.Note: The SL Nano can only be mounted centrally in front of the display with this holder.
SL Nano lamp mount for aero handlebars from Canyon (Canyon CP10/CP12 Aerocockpit). Suitable for mounting the SL Nano (SL Nano AF) with or without bike computer directly under your aero handlebar. The black anodized aluminum holder is mounted with two screws directly below the handlebar.Developed in collaboration with Canyon, compatible with all Canyon aero cockpits except H11/H36.
Quickrelease mount for SL Nano for mounting on bars with fitting diameter. It is made of CNC-milled, black anodised aluminium.The rubber pad prevents scratches and ensures a firm hold.Distance from the mounting hole of the holderscrew to the edge approx. 15mm, clamp width 7mm.
The Knipex wire stripper strips cables without manual adjustment. The pliers are already adjusted to our e-bike cables (and can still be used on any other type of cable). Compact, handy and lightweight tool for common cable cross sections and insulation materials.Housing: plastic, glass fiber reinforcedBlade: special tool steel, oil-hardened, replaceable
Stem clamps for mounting the SL Nano Newmen on Evolution 318.3 stems of Newmen. With these stem clamps the SL Nano can be mounted on existing Newmen stems.
Scotchlok Y-connector set for mounting on the e-bike.With the Scotchlok connector, a light cable can be separated and rejoined. If necessary, a second device (e.g. the C14 tail light) can be parallel connected via the Y-connection. Waterproof due to gel insert.
Peppi V5 XL handlebar holder with EPDM insert for best grip, compatible with all Lupine remote controls.Maximum bar diameter: 32mm, width: 16.4mm, strap length: 85mm.
Peppi V5 handlebar holder with EPDM insert for best grip, compatible with all Lupine radio remote controls.Maximum bar diameter: 22mm, width: 13.4mm, strap length: 62mm.
The matching CR2032 buttoncell for Bluetooth remote controls.Please do not press in older radio transmitters, the previous model is not designed for the thicker button cell.
Matt black retaining screws for mounting the lamp head on the FrontClick holder or quick release/clamp. Suitable for: Neo, Piko, Blika, Wilma, SL Mono, SL Nano, SL Nano AF, SL F, SL AF, SL MiniMax, SL MiniMax AF
If an quickrelease mount is used, the filler plug does protect the lights second thread.The filler plug is already delivered with all quickrelease mounts!
The Bluetooth remote control for all our SL bike lights with StVZO approval.It has two buttons. The large button with headlight symbol is used to activate the high beam in the dark, the small button to dim the low beam.Compatible with Peppi V5, Peppi V5 XL and the wristband holder for remote controls. Only compatible with already bluetooth-capable lamps. Supplied with button cell and without holder.
With the self-adhesive cable guide the C14 light cable can be led cleanly from the seat tube to the engine of your e-bike. The soft 3M adhesive pad ensures that the clamp can be easily attached to slightly curved surfaces. The cable guide is also ideal for attaching the cable of the SL remote controls directly to the handlebars.
Adjustable aluminium bracket for mounting the SL/SLF on the handlebars of your e-bike. Adjustment range from 28mm to 40mm arm length (from handlebar to hole centre). Perfect for thicker stems, Bosch Smartphone Hub or bike computer. Handlebar diameter chooseable: 31.8mm/35mm
