Wired remote control in a length of 29cm for our e-bike lighting SL MiniMax. Cable length measured from the lamp to remote control. The inner diameter of the clamp is 22mm.The button is mounted uncomplicated next to the handlebar grip and fixed with a screw.
Lamp holder for the second generation of the Bosch Nyon display (Nyon 2020). For mounting, the pieces of the mount below the handlebars are replaced by the mount for the lamphead.Suitable for SL X and SL MiniMax.Note: The SL MiniMax comes with only one thread as standard, therefore the article for the doublethread upgrade must also be ordered (see "Recommended").
Connection set for rejoining an already separated light cable for e-bikes.The enclosed foam tunnel prevents any rattling in the frame. The two-pole cable connection is waterproof due to its grease filling.
The Knipex wire stripper strips cables without manual adjustment. The pliers are already adjusted to our e-bike cables (and can still be used on any other type of cable). Compact, handy and lightweight tool for common cable cross sections and insulation materials.Housing: plastic, glass fiber reinforcedBlade: special tool steel, oil-hardened, replaceable
Scotchlok Y-connector set for mounting on the e-bike.With the Scotchlok connector, a light cable can be separated and rejoined. If necessary, a second device (e.g. the C14 tail light) can be parallel connected via the Y-connection. Waterproof due to gel insert.
Matt black retaining screws for mounting the lamp head on the FrontClick holder or quick release/clamp. Suitable for: Neo, Piko, Blika, Wilma, SL Mono, SL Nano, SL Nano AF, SL F, SL AF, SL MiniMax, SL MiniMax AF
E-bike light cable set with motor connection for mounting all e-bike front lights with plug connection. Please select the appropriate motor type._____________________________________________________________________________________Hinweis: Lamp models from August 2021 are equipped with a plug connection on the light cable. If a light cable is required for older modelsplease order the appropriate Lightcable without plug connection here.Light cable length 16.5 cm, together with the cable on the headlamp and the light cable in the frame this gives a total length of 1.33m.
With the self-adhesive cable guide the C14 light cable can be led cleanly from the seat tube to the engine of your e-bike. The soft 3M adhesive pad ensures that the clamp can be easily attached to slightly curved surfaces. The cable guide is also ideal for attaching the cable of the SL remote controls directly to the handlebars.
Adjustable aluminium bracket for mounting the SL/SLF on the handlebars of your e-bike. Adjustment range from 28mm to 40mm arm length (from handlebar to hole centre). Perfect for thicker stems, Bosch Smartphone Hub or bike computer. Handlebar diameter chooseable: 31.8mm/35mm
Together with this increase diameter you can mount a 31.8mm quickrelease or barmount on your 25.4mm handlebar. Compatible with every quickrelease or barmount.Material: PA 12Print method: SL S
