E-bike light cable set with motor connection for mounting all e-bike front lights with plug connection. Please select the appropriate motor type._____________________________________________________________________________________Hinweis: Lamp models from August 2021 are equipped with a plug connection on the light cable. If a light cable is required for older modelsplease order the appropriate Lightcable without plug connection here.Light cable length 16.5 cm, together with the cable on the headlamp and the light cable in the frame this gives a total length of 1.33m.
Wired remote control on Peppi with high beam in various lengths for our e-bike lights (SL F, SL X and SL Nano). Cable length measured from lamp to remote control.The Peppi enables quick and uncomplicated installation. Despite the possible additional support on Shimano brakes, the button can be mounted close to the handle. With the additionally available Peppi V5 XL, the remote control can also be attached to racing bike handlebars or handlebars with a larger diameter.The width of the Peppi is 13.4mm, the dimensions of the remote control are 20x25x7mm. The remote control can be replaced with the plug on the cable itself.
_________________________________________________________________________________
Note:Not compatible with the bluetooth version of the SL Nano.In combination with the Classicmount, a minimum length of 67cm is required.
Connection set for rejoining an already separated light cable for e-bikes.The enclosed foam tunnel prevents any rattling in the frame. The two-pole cable connection is waterproof due to its grease filling.
The Knipex wire stripper strips cables without manual adjustment. The pliers are already adjusted to our e-bike cables (and can still be used on any other type of cable). Compact, handy and lightweight tool for common cable cross sections and insulation materials.Housing: plastic, glass fiber reinforcedBlade: special tool steel, oil-hardened, replaceable
Scotchlok Y-connector set for mounting on the e-bike.With the Scotchlok connector, a light cable can be separated and rejoined. If necessary, a second device (e.g. the C14 tail light) can be parallel connected via the Y-connection. Waterproof due to gel insert.
If an quickrelease mount is used, the filler plug does protect the lights second thread.The filler plug is already delivered with all quickrelease mounts!
Matt black bracket screws for mounting the Neo, Piko, Blika, Wilma, SL Nano AF und SL AF/ SL F (one-sided mountingon the e-bike with cnc-milled aluminium holder).
SL F holder for the second generation of the Bosch Nyon display (Nyon 2020). For mounting, the holder halves below the handlebar are replaced by the SL F holder.
Lampmount for the Syntace TwinFix System for Piko, Blika, SL F and SL AF.
With the holder, our Piko, Blika and the two-thread variants of the SL AF and SL F can be mounted on the Syntace Megaforce 2, Flatforce and Liteforce 50 stems.____________________________________________________________________________________Note:Please order the fitting screws for SL F.
Recommendation:If the holder is mounted frontally (horizontal), we recommend the "S".For mounting upside-down (vertical), we recommend version"M".The adapter in version "L" allows completely flexible mounting. The lamp head of the SL AF can be rotated completely. Arm length (back stop to middle screw):Version L: approx. 42 mmVersion M: approx. 35 mmVersion S: approx. 22 mm
With the self-adhesive cable guide the C14 light cable can be led cleanly from the seat tube to the engine of your e-bike. The soft 3M adhesive pad ensures that the clamp can be easily attached to slightly curved surfaces. The cable guide is also ideal for attaching the cable of the SL remote controls directly to the handlebars.
Adjustable aluminium bracket for mounting the SL/SLF on the handlebars of your e-bike. Adjustment range from 28mm to 40mm arm length (from handlebar to hole centre). Perfect for thicker stems, Bosch Smartphone Hub or bike computer. Handlebar diameter chooseable: 31.8mm/35mm
Working for nearly all SL F lights with two threads. The installation is possible at all forks with hole. To attach the mount a M6 x 35 screw is included.
Note: Not suitable for SL B Bosch and SL BF.The wired remote control should have a minimum length of 67cm in combination with the Classicmount.
Handlebar diameter:
31.8 mm
|
Stem:
V50 (50-60 mm)
Barmount for mounting the SL F E-bike light permanently to the handlebar.It is made of CNC-milled and black anodised aluminum and compatible with stems of 50-60mm width.
Two-sided handlebar bracket for mounting the two-thread variant of the SL F on handlebars with 35mm diameter. Also compatible with all two-thread variants of the SL S, and SL A and SL AF.Clamp width: 5.3mm
Wired remote control with high beam in various lengths for out e-bike lights (SL F, SL X and SL Nano). Cable length is measured from lamp to remote control. The remote control is 14 mm wide.
_________________________________________________________________________________
Note:Not compatible with the bluetooth version of the SL Nano.In combination with the Classicmount, a minimum length of 67cm is required.
