We will be on holiday from 24 December to 1 January. Parcels will not be dispatched during this time and our customer service will also be enjoying the holidays. We'll be available again as usual from 2 January. In the meantime, please send us your questions by email to info@lupine.de.
We wish you happy holidays and a happy new year.
FrontClick helmet mount with 3M adhesive pad for mounting on full-face, ski and safety helmets.The helmet holder has a height of 8.5 mm (incl. adhesive pad).
The FrontClick helmet mount with Hook & Loop for helmets with ventilation slots.The straps are simply fed through the ventilation slots and the lamp is simply clicked into the holder. An EPDM pad ensures a non-slip grip on the helmet.
With the cableguides, the lightcable can be attached to the helmet. Because of the soft adhesive pad, it stays on straight and also slightly cuved surfaces.
Piko FrontClick mount for attaching the lamp head to a headband or helmet mount with FrontClick counterpart.With the FrontClick system a quick tool-free change of the lamp from the helmet to the headband is possible.The mount screws (item i174) are required for installation!
Battery helmetmount for attachment to helmets with air vents. Suitable for all FastClick batteries in combination with the Neo, Piko or Blika lampheads. To mount, pass the hook&loop tape through the ventilation slots, thread the ends through the eyelets on the holder and fasten.
The FrontClick barmount completes our FrontClick quick change system and allows a quick and tool-less mounting of all FrontClick lamps (except Alpha, Betty and Penta) on the handlebar.The mount itself is made of glass fiber reinforced polyamide and is fixed to the handlebar with two screws.Distance between the clamps: 50mm
FastClick battery helmet holder incl. 3M Duallock. With the 3M Duallock, the battery holder can be easily removed from the helmet at any time. The battery itself is simply, securely and quickly clicked into the shell.
Front plate for the Neo/PentaPro/Piko/Blika headband with FrontClick mount.An existing front plate can simply be unthreaded and replaced with the FrontClick plate.A suitable FrontClick lamp mount must be ordered separately!
Quickrelease mount for the models Neo, Piko and Blika for mounting on bars with fitting diameter. It is made of CNC-milled, black anodised aluminium.The rubber pad prevents scratches and ensures a firm hold.Distance from the mounting hole of the holderscrew to the edge approx. 20mm, clamp width 8mm.
Lupine Spacer with GoPro mount: 10mm high, inner diameter: 1 1/8 inches, aluminum black anodized, incl. M4 locking screw.Not compatible with the original GoPro mount. An adapter is also required for lamp mounting.
Flexmount quick release for attaching a lamphead to bars with a suitable diameter.It is made of CNC-milled and then black anodised aluminium. The rubber pad prevents scratches and ensures a firm hold on the handlebar.Distance from the mounting hole of the bracket screw to the bracket edge minimum 27mm, maximum 40mm, clamp width 8mm.Suitable for the models Neo, Piko, Blika, Wilma, Betty, SL Mono, SL Nano AF, SL AF, SL Minimax AF, SL AX.
Universal GoPro mount: Thanks to the slotted hole (10.6mmx6.2mm), the holder can be mounted on just about any hole and creates a GoPro mount anywhere you want it.
Hook&Loop strap for our FrontCLick mounts to fasten on helmets with ventilation slots.Compatible with all FrontClick helmet mounts and older generation Neo/Piko/Blika helmet holders.
Lights with FrontClick mount can be attached to the side of the helmet or directly to the strap of the MTB goggle or ski goggles with this holder.Four silicone pads prevent slipping on the helmet and a special nub structure on the inside promises the best hold on the strap.We recommend not using the holder with the Alpha for weight reasons. Maximum strap width: 42 mm
Hook&loop strap for our battery helmetmount for attachment to helmets with ventilation slots. Suitable for all FastClick batteries (2.0Ah and 3.5Ah) in combination with the Neo, Piko or Blika lamp heads. To mount, pass the velcro tape through the ventilation slots, thread the two ends through the eyelets on the holder and fasten.
Cable guide for an extension cable when using a 6.9 Ah battery (or larger) on the Neo/PentaPro/Piko/Blika headband.Due to their weight, the large batteries are no longer worn on the headband, but are stored in the backpack, for example.
The increase enlargement for handlebars with a diameter of 31.8 mm enables the use of a quickrelease in size 35 mm on the thinner tube diameter.Suitable with every quickrelease or barmount.
Mount for aero handlebars from Canyon (Canyon CP10 Aerocockpit CF). Suitable for mounting SL F, Piko and Blika with or without bike computer. The black anodized aluminium bracket is mounted with two screws directly to the mount underneath the handlebars. Designed in cooperation with Canyon, compatible with all canyon aero cockpits except H11/H36.
The increase enlargement for handlebars with a diameter of 22 mm enables the use of a quick release in size 25.4 mm on the thinner diameter.
Suitable for Neo, Piko and Blika.
Universal Aero GoPro adapter for mounting on Aero handlebars to create a GoPro mount. The matching counterpart for lamp mounting is available via our accessories - see ‘Recommended’
Display holder that can depending on variant be mounted under aero handlebars or on round bars (diameter 31.8 mm),with integrated GoPro mount on the bottom side and selectable with matching Garmin or Wahoo mount.Our SL Grano can be mounted directly, other lamp models are mounted using theappropriate Lupine GoPro adapter (not included).Made of CNC drilled black anodized aluminium.
Display holder that can depending on variant be mounted on aero handlebars or round bars, with integrated GoPro mount on the bottom side,selectable with matching Garmin or Wahoo mount.Our SL Grano can be mounted directly, other lamp models are mounted using theappropriate Lupine GoPro adapter (not included).Made of CNC drilled black anodized aluminium.
Lampmount for the Syntace TwinFix System for Piko, Blika, SL F and SL AF.
With the holder, our Piko, Blika and the two-thread variants of the SL AF and SL F can be mounted on the Syntace Megaforce 2, Flatforce and Liteforce 50 stems.____________________________________________________________________________________Note:Please order the fitting screws for SL F.
With the lamp holder, the Piko and Blika can be attached under the Smart Map Gripper by Syntace. In combination with the USB Two, the smartphone can also be charged on the road, for example.
