With the USB Charger, Lupine batteries with 7.2V system (except the Alpha battery) can be charged with up to 1.5A charging current on end devices with a USB connection. For example, on a PC or via the USB power supply of a smartphone - also suitable for solar panels.
Transport case with Lupine print made of durable cordura. Available in olive green or gray, 24x20x9 cm.The dividers can be used to divide the interior and store the contents safely. The compartment in the lid offers additional space for small parts, cables, etc.
Transport case with Lupine print made of durable cordura. Available in olive green or gray, 24x20x9 cm.The dividers can be used to divide the interior and store the contents safely. The compartment in the lid offers additional space for small parts, cables, etc.
Flexmount quick release for attaching a lamphead to bars with a suitable diameter.It is made of CNC-milled and then black anodised aluminium. The rubber pad prevents scratches and ensures a firm hold on the handlebar.Distance from the mounting hole of the bracket screw to the bracket edge minimum 27mm, maximum 40mm, clamp width 8mm.Suitable for the models Neo, Piko, Blika, Wilma, Betty, SL Mono, SL Nano AF, SL AF, SL Minimax AF, SL AX.
Bluetooth remote control with one button to control our headlamp or helmetlamps Piko, Wilma and Betty. It can be attached to the handlebar using the Peppi holder or with the wristbandholder, e.g. on the wrist or backpack straps.Only compatible with already bluetooth-enabled lamps. Supplied with button cell, holder not included.
Cable for the USB Two with plug connection. Available with Apple Lightning connector, micro USB or USB C.The USB Two is connected between the battery and the lamphead and offers the possibility to charge the smartphone while riding via the battery.
HardCase battery without LED display with a capacity of 6.9 Ah/50Wh.This 240g battery can be used with all our battery lamps. A short and a long hook&loop strap with anti-slip coating is included in the delivery for attaching the battery to the frame.Dimensions: 79x41x48 mm. Cable length at battery approx. 12cm.
Smartcore battery with LED display with a capacity of 6.9 Ah/50Wh.This 240g battery can be used with all our battery lamps exept Alpha. A short and a long hook&loop strap with anti-slip coating are included for attaching the battery to the bicycle frame, for example.Dimensions: 79 x 41 x 48mm. Cable length at battery approx. 12cm.
Smartcore battery with LED display with a capacity of 10.0 Ah/70Wh.We recommend this 350g battery for the SL AX. For attaching the battery e.g. to the bicycle frame, a short and a long hook&loop strap with anti-slip coating are included. Dimensions: 157x52x31 mm. Cable length at battery approx. 12cm.
Smartcore battery with LED display with a capacity of 13.8 Ah/99Wh.This battery weighs 430g and can be used with all our battery lamps. For attaching the battery e.g. to the bicycle frame, a short and a long Hook&loop strap with anti-slip coating are included. Dimensions: 146x41x48 mm. Cable length at battery approx. 12cm.
Lupine Spacer with GoPro mount: 10mm high, inner diameter: 1 1/8 inches, aluminum black anodized, incl. M4 locking screw.Not compatible with the original GoPro mount. An adapter is also required for lamp mounting.
Peppi V5 XL handlebar holder with EPDM insert for best grip, compatible with all Lupine remote controls.Maximum bar diameter: 32mm, width: 16.4mm, strap length: 85mm.
New generation, breathable material and FrontClick-mount for Neo, Piko, Blika, Wilma and Betty. Lamphead is mounted via FrontClick, backpart is suitable for all FastClick batteries but can be re-equipped with a cable routing to lead your battery in your backpack.
The matching CR2032 buttoncell for Bluetooth remote controls.Please do not press in older radio transmitters, the previous model is not designed for the thicker button cell.
Peppi V5 handlebar holder with EPDM insert for best grip, compatible with all Lupine radio remote controls.Maximum bar diameter: 22mm, width: 13.4mm, strap length: 62mm.
The Erik V1 headband with FrontClick mount.Instead of the FastClick mount for batteries on the back, this headband is suited with a special mounting option. This allows you to use batteries without FastClick system, which are normally mounted on the bike frame with a hook&loop strap (3.5Ah to 13.8 Ah). Suitable for all lampheads with FrontClick mount (Neo, Piko, Blika, Wilma, Betty). Due to its weight, we do not recommend wearing the Alpha on the headband. The headband is made of high-quality PA6.6, produced in Germany and woven in Austria. Above all, this after-treatment makes the band water, dirt and oil repellent.
Replacement lens for the Betty. The current version is less harsh in the transition between centre and spot and provides an overalland provides a more pleasant light with more range. In addition, some annoying reflections in the peripheral area have been removed.Depending on the lamp, either the stardrive key or hexkey is required. The exchange can be done by yourself.
Diffuser for Betty made of tempered float glass for pleasant soft light. The lid is made of matte black anodized aluminum.To assemble, simply unscrew the old lid and screw on the new lid.
The USB One can be used to charge devices with an USB charging cable on a Lupine battery (smartphone, red light, Penta, etc).To do this, connect the USB One between the charging cable and the battery.Note:It is not possible to charge a Lupine battery using the combination of USB One, USB Charger and another battery.
Charger One for charging our Li-Ion batteries with 7.2V system (not suitable for the Alpha battery). The charger shows information about the charging status such as voltage and charged amps via the display.With the 12V adapter, the Charger One can be used on the car cigarette lighter. The Charger One is controlled by a microprocessor and has different charging and discharging functionswhich can be selected manually:1. Li-ion charging program (default program; 0.1 to 2.5A) - to charge the battery2. Li-Ion discharge program (0.1 to 0.5A) - to discharge the battery. (Do not store batteries empty)3. Discharge and charge program - full charge after previous discharge4. 50% storage program - charge the battery to 50% (for storage)
Betty quickrelease for mounting on bars with fitting diameter. It is made of CNC-milled, black anodised aluminium. The rubber pad prevents scratches and ensures a firm hold.Distance from the mounting hole of the holderscrew to the edge approx. 30mm, clamp width 8mm.
Diffuser for Betty made of tempered float glass for pleasant soft light. The lid is made of matte black anodized aluminum.To assemble, simply unscrew the old lid and screw on the new lid.
