The Peppi V5 XL mount is for all handlebars up to 32mm diameter and suitable for all remote controls. The polyamid Peppi got a special epdm rubber part and strap to be attached to the handlebar. 16,35 mm width, band 85mm
Our new Alpha light runs on a 14.4V system. Therefore the Charger One was modified to a special Alpha version.
14.4V battery (4 cells)
Charging current: 0.1 to 1.5A
Discharge current: 0.1 to 0.2A
7.2V Akkus (2 cells)
Charging current: 0.1 to 2.5A
Discharge current: 0.1 to 0.5A
Microprocessor controlled
Li-Ion 14.4V (4 cells) and 7.2V (2 cells)
Output: 24V=, >=1A
False pole protected
Input 100-240V~, 50-60Hz
Functions:
Li-Ion charge programm
Discharge programm
Discharge/ Charge programm
Storage programm
Alpha quickrelease for mounting on bars with fitting diameter. It is made of CNC-milled, black anodised aluminium.The rubber pad prevents scratches and ensures a firm hold.Distance from the mounting hole of the holderscrew to the edge approx. 20mm, clamp width 9mm.
The Peppi V5 mount is suitable for the bluetooth remote controls. The polyamid Peppi got a special epdm rubber part and strap to be attached to the handlebar: 13,35mm width, band length 62m
Instead of the drinking bottle cage, you can put ROLF to your bikeframe. Afterwards you can slide-in a Lupine Smartcore battery instead of using the velcro.You may eventually need an additional extension to mount the battery.
The extra long with our length of 30 cm strap does allow to mount the battery to bigger tubes up to 75 mm. A special anti-slip coating almost glues the battery to the frame.Suitable batteries:All Smartcore batteries except the uvex edition and FastClick batteries.
To put the bluetooth remote control at your wrist or backpack strap. If you want to put th remote control on a handlebar, the so called Peppi V4 or V5 is the better choice.
With the USB ONE you can charge USB devices from the Lupine battery. Note: Not compatible with the Alpha battery.E.g. you can charge our ROTLICHT from the Lupine battery.Output: 5V/1.5A
Input: 7.2V and 14.4V Lupine batteriesThe USB ONE is not made to charge the Lupine battery!
The shorter strap with 21 cm length is better suitable for thiner tubes up to 40 mm. A special anti-slip coating almost glues the battery to the frame.Suitable batteries:All Smartcore batteries except the uvex edition and FastClick batteries.
The Duallock system allows to mount the Piko/Neo on most helmets. Trouble makers could be helmets with small ribs. It will work perfect at even or light curved surfaces without air vents. Please clean the surface with the cleaning tissue.
14.4 V SmartCore battery with LED display with a capacity of 6.9 Ah/99Wh.This battery weighs 430g and was specially developed for the Alpha. For attaching the battery e.g. to the bicycle frame, a short and a long velcro tape with anti-slip coating are included. Dimensions: 146x41x48 mm. Cable length at battery approx. 12cm.
Universal GoPro Holder: Thanks to the slotted hole(10.6mmx6.2mm), the holder can be mounted on just about any hole and creates a GoPro mount anywhere you want it.
Helmet holder arm for mounting the Alpha on the FrontClick system. Suitable for the regular as well as the 3M FrontClick helmet holder. Not suitable for mounting on the headband!Use the screw of the Alpha and its O-rings for mounting.
