Battery tank with a capacity of 3.5 Ah for the Betty TL2 S and Betty TL2. It can be charged via the Charger One as well as with the Microcharger or Wiesel.
Replacement battery for the C14 Mag taillight with 4.4 Wh, 22h max. runtime and a charging time of 3h.After the original has expired, it can be replaced by yourself using the TX5 tool provided. To do this, open the screws and remove the cover. If it is difficult to lift up, use the magnetic holder as a lever.
Housing shell for the C14 Mag made of glass-fibre reinforced polyamide. Can easily be exchanged by yourself.Compatible with both the international and StVZO-approved version of the C14 Mag.
Magnetic mount for the C14 Mag with StVZO-approval. To mount on the seat post, simply place the strap around it and secure it on the other side.Compatible with both the international and the StVZO version of the C14 Mag.
Replacement battery for the SL Mono with 12Wh, 16h max. runtime and a charging time of 3:30h. After the original battery has expired, it can be replaced by yourself with the TX5 tool included. To do this, open the screws and remove the rear cover.
Conversion kit for the C14 Mag International for mounting a saddlebag.Replace the counterpart on the magnetic holder with the saddlebag holder and mount it as usual between the saddle stays. Then thread the Velcro fasteners of the saddle bag through the eyelets and close.The total width of the holder is 68.7 mm. The Velcro eyelets have an inner dimension of 20.8 x 3.6 mm. Made of CNC-milled aluminium.
Quickrelease mount made of CnC-milled aluminum for mounting the SL Mono to handlebars with fitting diameter. The EPDM-inlay avoids scatches on the handlebar and ensures a firm hold without slipping.Distance from the mounting hole of the holderscrew to the edge approx. 25mm, clamp width 8mm.
SL Nano holder made of CNC-milled aluminium for mounting on the Bosch Kiox/Kiox300 display. For mounting, the holder is clamped between the handlebar bracket and the display mounting plate.
Longer screws with bluecoating (screw lock) for installing the C14 Mag mount between the saddle rails. For saddles with carbon rails.
_______________________________________________________________________________________
Notes:
Do not use O-rings on carbon saddles, otherwise the holder will not close.
Magnetic aluminum holder for the C14 Mag for mounting between the saddle stays.The minimum distance between saddle and saddle stays for mounting is 21mm. For mounting on carbon saddlestwo additional retaining screws are included in the delivery. The C14 Mag is compatible with all standardised seat stay distances (approx. 35mm).Compatible with both the international and the StVZO version of the C14 Mag.
Wired remote control on Peppi with high beam in various lengths for our e-bike lights (SL F, SL X and SL Nano). Cable length measured from lamp to remote control.The Peppi enables quick and uncomplicated installation. Despite the possible additional support on Shimano brakes, the button can be mounted close to the handle. With the additionally available Peppi V5 XL, the remote control can also be attached to racing bike handlebars or handlebars with a larger diameter.The width of the Peppi is 13.4mm, the dimensions of the remote control are 20x25x7mm. The remote control can be replaced with the plug on the cable itself.
_________________________________________________________________________________
Note:Not compatible with the bluetooth version of the SL Nano.In combination with the Classicmount, a minimum length of 67cm is required.
With the Classicmount, the SL Nano can be mounted on fork crowns with a hole. An M6 x 35 screw is supplied for mounting.Combined with the classicmount, the wired remote control should have a minimum length of 67cm.
Flexmount quick release for attaching a lamphead to bars with a suitable diameter.It is made of CNC-milled and then black anodised aluminium. The rubber pad prevents scratches and ensures a firm hold on the handlebar.Suitable for all Lupine lampheads. Distance from the mounting hole of the bracket screw to the bracket edge minimum 27mm, maximum 40mm, clamp width 8mm.
Connection set for rejoining an already separated light cable for e-bikes.The enclosed foam tunnel prevents any rattling in the frame. The two-pole cable connection is waterproof due to its grease filling.
FrontClick headband in various colours with FastClick system. Suitable for Neo, Piko and Blika lampheads.If the headlamp is used with a 6.9 Ah battery (or larger), the battery holder at the back of the head is replaced by the cable guide and the battery is stored in the backpack.If necessary, the top band can also be separated from the headband.
FrontClick headband in various colours with FastClick system. Suitable for Neo, Piko and Blika lampheads.If the headlamp is used with a 6.9 Ah battery (or larger), the battery holder at the back of the head is replaced by the cable guide and the battery is stored in the backpack.If necessary, the top band can also be separated from the headband.
FrontClick headband in various colours with FastClick system. Suitable for Neo, Piko and Blika lampheads.If the headlamp is used with a 6.9 Ah battery (or larger), the battery holder at the back of the head is replaced by the cable guide and the battery is stored in the backpack.If necessary, the top band can also be separated from the headband.
To install the backpack mount, unscrew the original mount.
Make sure the rubber inlay is placed accurately in the plastic part. Attach the new mount by using the original screws.Note: Due to its weight, we do not recommend using the Rotlicht MAX with the Backpack mount.
