The Extension Kit helps to align the lamphead (depending on the width of the stem) centrally on the handlebar.The bolt moves the lamp further inwards.Example:The quickrelease mount is attached directly next to the stem, which is 40mm wide and the lamp is perfectly centered.With a 50mm wide stem, the 5mm Extension Kit is necessary for a central alignment.
With the longrunner cable with USB-A to USB-C connector, the SL Mono bicycle lamp can be charged from the powerbank or with the USB One and a Lupine battery while riding. Cable length: 40cm
In the Light Bag you can safely store your lamp and accessories. Due to the sewn-in elasticated straps, they stay reliably in place. With dimensions of approx. 16 x 12 x 6 cm, it is also extremely space-saving. Available in dark grey and neon yellow.
E-bike light cable set with motor connection for mounting all e-bike front lights with plug connection. Please select the appropriate motor type._____________________________________________________________________________________Hinweis: Lamp models from August 2021 are equipped with a plug connection on the light cable. If a light cable is required for older modelsplease order the appropriate Lightcable without plug connection here.Light cable length 16.5 cm, together with the cable on the headlamp and the light cable in the frame this gives a total length of 1.33m.
Battery tank with a capacity of 3.5 Ah for the Betty TL2 S and Betty TL2. It can be charged via the Charger One as well as with the Microcharger or Wiesel.
Replacement battery for the C14 Mag taillight with 4.4 Wh, 22h max. runtime and a charging time of 3h.After the original has expired, it can be replaced by yourself using the TX5 tool provided. To do this, open the screws and remove the cover. If it is difficult to lift up, use the magnetic holder as a lever.
Housing shell for the C14 Mag made of glass-fibre reinforced polyamide. Can easily be exchanged by yourself.Compatible with both the international and StVZO-approved version of the C14 Mag.
Magnetic mount for the C14 Mag with StVZO-approval. To mount on the seat post, simply place the strap around it and secure it on the other side.Compatible with both the international and the StVZO version of the C14 Mag.
Conversion kit for the C14 Mag International for mounting a saddlebag.Replace the counterpart on the magnetic holder with the saddlebag holder and mount it as usual between the saddle stays. Then thread the Velcro fasteners of the saddle bag through the eyelets and close.The total width of the holder is 68.7 mm. The Velcro eyelets have an inner dimension of 20.8 x 3.6 mm. Made of CNC-milled aluminium.
Quickrelease mount made of CnC-milled aluminum for mounting the SL Mono to handlebars with fitting diameter. The EPDM-inlay avoids scatches on the handlebar and ensures a firm hold without slipping.Distance from the mounting hole of the holderscrew to the edge approx. 25mm, clamp width 8mm.
Transport case with Lupine print made of durable cordura. Available in olive green or gray, 24x20x9 cm.The dividers can be used to divide the interior and store the contents safely. The compartment in the lid offers additional space for small parts, cables, etc.
Transport case with Lupine print made of durable cordura. Available in olive green or gray, 24x20x9 cm.The dividers can be used to divide the interior and store the contents safely. The compartment in the lid offers additional space for small parts, cables, etc.
SL Nano holder made of CNC-milled aluminium for mounting on the Bosch Kiox/Kiox300 display. For mounting, the holder is clamped between the handlebar bracket and the display mounting plate.
Longer screws with bluecoating (screw lock) for installing the C14 Mag mount between the saddle rails. For saddles with carbon rails.
_______________________________________________________________________________________
Notes:
Do not use O-rings on carbon saddles, otherwise the holder will not close.
The Alpha lamphead with 8100 lumens, Bluetooth, app control and a range of up to 480 metres. It provides daytime running light, low beam, high beam and an LED bar that shows the lightmode which the Alpha is running on and the battery status. The Alpha is mounted with the FrontClick helmet holder. The remote control is attached to the Peppi holder. The Alpha is both waterproof and shock resistent according to IP68 and IK09.
Magnetic aluminum holder for the C14 Mag for mounting between the saddle stays.The minimum distance between saddle and saddle stays for mounting is 21mm. For mounting on carbon saddlestwo additional retaining screws are included in the delivery. The C14 Mag is compatible with all standardised seat stay distances (approx. 35mm).Compatible with both the international and the StVZO version of the C14 Mag.
Wired remote control on Peppi with high beam in various lengths for our e-bike lights (SL F, SL X and SL Nano). Cable length measured from lamp to remote control.The Peppi enables quick and uncomplicated installation. Despite the possible additional support on Shimano brakes, the button can be mounted close to the handle. With the additionally available Peppi V5 XL, the remote control can also be attached to racing bike handlebars or handlebars with a larger diameter.The width of the Peppi is 13.4mm, the dimensions of the remote control are 20x25x7mm. The remote control can be replaced with the plug on the cable itself.
_________________________________________________________________________________
Note:Not compatible with the bluetooth version of the SL Nano.In combination with the Classicmount, a minimum length of 67cm is required.