New
Penta Pro Headlamp
€189.00*
Battery:
22 Wh / 3.1 Ah Hardcase
|
Colour Temperature:
5700 Kelvin (daylight)
|
Headband:
Black
The Penta Pro shines up to 1.400 lumens at a distance of approx. 140 meters and is our first sensor-controlled headlamp. It has various light modes, an external rechargeable battery and a brightness and tilt sensor.
The former measures the ambient light and automatically controls the brightness of the standard white levels depending on the amount of light. The tilt sensor detects when the head is tilted to read a map, for example, and dims the light to enter the reading mode. When the head is lifted again, the Penta Pro returns to the previously selected light level. The function can be deactivated briefly by pressing the top button. It remains inactive until the lamp is tilted again.
The Penta Pro has a white light, red light, a diffuse reading light, each in several levels, as well as a flash and SOS special function. The 5-lens system with multi-illumination pattern is already familiar from the Penta and provides the same, but much brighter, uniform and wide-ranging light pattern.
The white light functions are controlled via the button on top of the lamp, while the red light functions are controlled via the button on the underside. The Penta Pro also has a key lock to prevent it from being switched on unintentionally during transport.
The lamphead of the Penta Pro is attached to the headband using the FrontClick system and the battery using the FastClick mount. The lamp head also shows the remaining battery capacity, and the 3.5Ah SmartCore battery also has a charge level indicator. The red indication LEDs also serve as a signal light in the back.
As with all Lupine lamps, the housing of the Penta Pro is made of CNC-milled aluminum. In addition, the headlamp is both shock and water resistant to IP67 and IK09.
SL Nano E-Bike Newmen Kit
€240.00*
Highbeam:
with Highbeam | Wired Remote
|
Size:
40 mm
The SL Nano in the Newmen Kit consisting of the lamp head (with wired remote control), stem and matching stem clamps. 700 lumens of low beam and 1000 lumens of high beam out of a lamp that weighs just 52g.The small StVZO-approved headlight comes optionally with a wired remote control that can be used to switch between high and low beam. The SL Nano Newmen is held directly on the stem by two special stem clamps.Connection cable compatible with Shimano motors - for Bosch, Brose and Yamaha please also order the matching light cable and possibly Scotchlok connectors.
Variants from €160.00*
New
Rotlicht (International)
€98.00*
Colour:
White
160 lumen taillight with brightness sensor, brake light, various light modes (continuous light, flashing, pulsing, etc.) and up to five different dimming levels. Equipped with a white circuit board and semi-matt housing finish.The sensor technology with brake light provides additional safety. The waterproof hardware is designed for daily use in wind and rain and easily withstands temperatures from -25 to 70 degrees celsius. The battery, which is integrated into the taillight, is charged via a micro USB in the back. A plug protector is attached to the charging socket, so neither dust nor dirt gets inside. The taillight is mounted with the enclosed strap underneath the bikeseat. Delivery includes a short and a long strap each. They cover a 22 to 55 mm diameter. The excess strap can easily be shortened if necessary.
New
SL MiniMax AF
€530.00*
Battery:
35 Wh / 5.0 Ah SmartCore
|
Handlebar Diameter:
31.8 mm
The new SL MiniMax AF bicycle light is equipped with up to 2400 lumens of high beam, low beam and daytime running light as well as Bluetooth remote control and is of course approved for road traffic. The brightness sensor detects when it gets dark and automatically switches from daytime running light to low beam. The latter illuminates the road with 900 lumens absolutely glare-free, without dazzling oncoming traffic. The lamphead, which weighs 100g, is connected via Bluetooth to the remote control, which can be used to switch between low and high beam. This is attached to the Peppi holder next to the handlebar grip. The symbol on the switch lights up blue as soon as you turn it on. The SL MiniMax AF illuminates your path absolutely brightly and evenly for up to 260m. You have a choice of three different batteries, depending on the duration of the light. They are attached to the top or bottom tube with a coated hook&loop strap. At the touch of a button, you can read the remaining capacity on the SmartCore display. With the quick release for round handlebars, made of CNC-machined aluminium, the lamp is mounted next to the stem in seconds and thus sits symmetrically in the centre of the handlebar. The housing, also made of CNC-milled and black anodised aluminum, is particularly robust, durable and heat-resistant. The SL MiniMax AF is also waterproof and shockproof according to IK09 and IP67.
New
SL MiniMax for E-Bikes
€380.00*
Motor:
Bosch
|
Handlebar Diameter:
31.8 mm
The SL MiniMax for e-bikes offers a light output of up to 2100 lumens in the high beam. The low beam reaches 900 lumens. An additional daytime running light function increases visibility during the day. The range of the high beam is 210 metres. The integrated brightness sensor automatically activates the low/high beam when darkness falls. The compact remote control is included in the delivery and is mounted directly next to the right handlebar grip. Low and high beam are indicated by the button's green and blue backlighting. The lamp housing is made entirely of CNC-machined aluminum, just as the front cover. The total weight of the lamp head is 100 grams. The delivery includes the selected CNC-machined aluminium bracket for mounting on the handlebar. It is always mounted on the left hand side of the stem. With the optionally available extension kit, the mounting can also be realised centrally on extra-wide stems. The SL Minimax is waterproof and impact-resistant according to IK09 and IP67.
SL F E-Bike Classic
€350.00*
Cable Length:
67 cm
The SL F Classic for e-bikes with StVZO approval for mounting on the fork crown or on a cargo bike. The 900 lumen low beam illuminates the road without dazzling oncoming traffic, the 1300 lumen high beam has a range of 230m. The 100g light lamp head is connected to the remote control via a cable, with which you switch between low and high beam. The symbols on the clamp indicate by green or blue light, which mode is activated. The housing is made of CNC machined and black anodized aluminum and is particularly robust, durable and heat-resistant. The SL F is waterproof and heat-resistant according to IK09 and IP67.Length lightcable: 2mLength remote control cable: 67cm
SL X for E-Bikes
€440.00*
Motor:
Bosch
|
Handlebar Diameter:
31.8 mm
With up to 2800 lumens high beam, the SL X is our brightest StVZO approved e-bike light and gives youthe feeling of absolute safety, even off the road.Depending on the ambient light, a built-in brightness sensor triggers an automatic switch betweendaytime running light and low beam. Keep an eye on everything at any time and increase your visibilityfor others without dazzling oncoming traffic. The lamp switches on automatically when the motor of the e-bike is started. To switch it off, press and hold the button on the remote control.Future-proof: Your new e-bike provides more power for the light output than your old one? Simplyadjust the settings of your SL X to the technical opportunities of your e-bike and still get the maximumoutput in the future.18W: 1700 Lumens max.22W: 2100 Lumens max.26W: 2500 Lumens max.30W: 2800 Lumens max.
SL X E-Bike Bosch Intuvia/Nyon
€440.00*
Display:
Nyon
With up to 2800 lumens of high beam, the SL X is our brightest e-bike light with StVZO approval. For mounting on a Bosch Intuvia/Nyon display, a bracket is included that replaces the bracket clipbelow the display. The 900 lumen low beam ensures optimum visibility without dazzling oncomingtraffic. Out of town the high beam illuminates the road or trail for up to 370m. As soon as the brightnesssensor detects darkness, the SL X automatically switches from daytime running light to low beam. At the same time, the high beam can be can be activated. This is connected to the lamphead via a cableand is attached next to the handlebar grip. handlebar. The symbols indicate by green or bluelight whether you are in low beam or high beam. In addition to the factory setting, the SL X can beindividually programmed. The black anodised housing made of The black anodised housing made of CNC-milled aluminium isparticularly durable, heat-resistant and has ideal heat conduction properties. The SL X is alsowaterproof and impact-resistant according to IK09 and IP67. The lamp switches on automaticallywhen the motor of the e-bike is started. To switch it off, press and hold the button on the remote control._____________________________________________________________________________________Notice: The Bosch Nyon display can only be mounted in combination with the SL X in the central mountingdirection. Front mounting is not possible. Future-proof: Your new e-bike provides more power for the light output than your old one? Simplyadjust the settings of your Simply adjust the settings of your SL X to the technical possibilities of youre-bike and continue to get the maximum luminosity in the future. (18W: 1700 lumen max., 22W: 2100lumen max., 26W: 2500 lumen max., 30W: 2800 lumen max.)
SL AX
€634.00*
Battery:
6.9 Ah Battery Tank
|
Handlebar Diameter:
31.8 mm
The new version of the SL AX: Now with up to 3800 lumens of high beam and improved light pattern. The StVZO-approved bike light comes with high beam, low beam and daytime running light function, external battery and Bluetooth remote control.The brightness sensor of the SL AX detects darkness and automatically switches from daytime running light to lowbeam, simultaneously releasing the highbeam. The ladder has a range of up to 370m and provides best visibility outside the city and on trails. If the lowbeam is activated, the Bluetooth remote control can be used to switch to highbeam and back again. With the "Peppi" holder, it is securely attached next to the handlebar. The lamphead is mounted next to the stem with the CNC-machined aluminium quickrelease mount, the battery is attached on the bike frame with the hook&loop strap. The batteries have a capacity indicator (SmartCore) and a maximum runtime of up to 20h (6.9Ah), 28h (10.0Ah) or 40h (13.8Ah), depending on the model selected. The housing of the SL AX is also made of CNC-milled and then black anodised aluminium and is particularly durable, sturdy and heatresistant. The SL AX is also both impact and water resistant according to IK09 and IP67.
Betty TL2 S
€710.00*
Set:
Large
The Betty TL2 S has a luminosity of up to 5800 lumens, a power of 0.3 - 45W and differs from the BTL2 only in the battery capacity. The small set does not contain any charging devices.One charge of the built-in 3.5Ah battery lasts up to 30 hours. The batterytank can be separated from the lamphead sothat the battery can be exchanged if necessary (also for the larger 6.9Ah or 10.4Ah battery). The total 11 light levels of theBetty TL2 S range from 0.3 to 45W. In addition, it has a 0.8W red light function, SOS, and a flash function.Like every Lupine lamp, the Betty TL2 S is impact- and waterresistant according to IK09 and IP68.
Variants from €555.00*
New
C14 (Taillight for E-Bikes)
€78.00*
Brake Light:
without Brake Light
|
Diameter Seat Clamp:
35.6 mm
The C14 rear light from Lupine is the first rear light for e-bikes that is integrated into the saddle clamp and approved by the StVZO. Optionally with brake light function. Due to a G-sensor, the C14 detects when braking and lights up brighter for a short time. The 45 lumen rear light is made of black anodised CNC-milled aluminum, the lens of robust polycarbonate. The C14 is impact-resistant and can withstand heavy splashes of water (IPX6). Though COB technology and Fresnel lenses, the C14 achieves high visibility in road traffic while reducing glare. The special arrangement of the 14 LEDs and a sophisticated lens system also create a particularly homogeneous lighting characteristic. The C14 is inherently compatible with Shimano motors. Included in the delivery are 3 cable guides for attaching the cable to the bicycle frame.Through pressing the button on the bottom, the C14 can easily be switched off.___________________________________________________________________________________Note:For installation on Bosch, Brose and Yamaha motors, please also order the appropriate adapter cable. The light cable on the C14 is 1 metre long, the adapter cables are 13 cm long.
C14 SP (Seatpost Version)
€76.00*
Brake Light:
without Brake Light
The C14 SP taillight for e-bikes as a seatpost version.
Optionally with brake light function. Due to the G-sensor, the C14 detects braking and lights up brighter for a short time.
The 45 lumens rear light is made of black anodised CNC-machined aluminium, the optics of robust polycarbonate. The C14 SP is waterproof and impact resistant according to IP68 and IK09. Due to the latest COB technology and powerful Fresnel lenses, the C14 SP achieves all-round high visibility while reducing glare. The special arrangement of the 14 LEDs and a sophisticated lens system also create a particularly homogeneous light characteristic.
The C14 SP is connected directly to the motor of the e-bike and is compatible with all current e-MTBs. An adapter cable is required for installation on Bosch, Brose and Yamaha motors. This has a length of 13 cm. The C14 SP is StVZO-approved and has a mounting width of 50mm.
The delivery includes inlays to increase the circumference from 31.6 to 30.9 mm. The two-piece clamp of the C14 SP allows for quick and easy installation without having to dismantle the seat post.
C14 G (Rack Version)
€59.00*
Brake Light:
without Brake Light
The C14 red light for e-bikes as a luggage carrier version. Optionally with brake light function. Due to the G-sensor, the C14 detects braking and lights up brighter for a short time.The 45-lumen taillight is made of black anodised CNC-machined aluminium, the optics of robust polycarbonate. The C14 G is impact-resistant and waterproof according to IPX6. Thanks to the latest COB technology and powerful Fresnel lenses, the C14 G achieves all-round high visibility with reduced glare. The special arrangement of the 14 LEDs and a sophisticated lens system also create a particularly homogeneous light characteristic. The C14 G is connected directly to the motor of the e-bike and is compatible with all current e-MTBs. An
adapter cable is required for installation on Bosch, Brose and Yamaha motors. This has a length of 13 cm. The C14 G is StVZO-approved and has a mounting width of 50mm.
SL Mono
€185.00*
Handlebar Diameter:
31.8 mm
The SL Mono is our first bikelight with integrated battery, StVZO-approved and easy to charge via USB-C port*.It has a daytime running light with 150 lumens, two levels of low beam with 350 and 700 lumens and a brightness sensor, which automatically activates the low beam in the dark. Thanks to the quick-release mounting on the handlebar, the lamp can be removed within seconds without tools. The housing and the quick-release are made of CnC-milled and then black anodised aluminium. The built-in 12Wh battery has a charging time of 3.5 hours and a maximum runtime of 1.5 hours in low beam or 9 hours in daytime running light. The SL Mono is water- and impact-resistant according to IK09 and IP67. As with all our lamps, we do not glue the housing to ensure long-term reparability and the replacement of individual parts.*Compatible charger (5V, 1A) required. USB Power Delivery (USB-PD) is not supported.
C14 Mag (StVZO)
€95.00*
The C14 Mag is the first taillight with an innovative magnetic mount. The 45 lumen rear light with brake light and brightness sensor is held by a bracket on the seat post. Simply place the strap around the tube and hook it onto the other side.The integrated rechargeable battery is fully charged within 3 hours with the enclosed magnetic charging cable and has a runtime of up to 22 hours. The C14 Mag impresses with its homogeneous light characteristic and guarantees good all-round visibility - even from the side.
Like all Lupine lamps, the C14 Mag is waterproof and impact resistant according to IP67 and IK09.
SL AF
€453.00*
Battery:
25 Wh / 3.5 Ah SmartCore
|
Handlebar Diameter:
31.8 mm
The SL AF international version with active LED ring in daytime running light, up to 1000 lumens glarefree low beam and up to 1300 lumens high beam, external battery and Bluetooth remote control. The SL AF is mounted with the quick release made of Cnc-milled aluminum. The battery is attached to the top or bottom tube of the frame with the enclosed coated hook&loop strap. In the dark the lamp switches automatically from daytime running light to low beam and releases the high beam. With the Bluetooth remote control can then be switched between low beam, high beam and the various light levels. The remote control is attached to the handlebar with the Peppi holder.The SL AF is also available as an alternate version for Canyon Aero handlebars and Megaforce 2 and Flatforce stems from Syntace (TwinFix).
SL Nano AF
€342.00*
Battery:
25 Wh / 3.5 Ah SmartCore
|
Handlebar Diameter:
31.8 mm
The SL Nano AF is a small, lightweight StVZO-approved bicycle lamp with 1200 lumens high beam, 700 lumenslow beam, daytime running light function, external battery and Bluetooth remote control.The SL Nano AF is mounted with the quick release. The battery is attached to the top or bottom tube of the frame with the enclosed coated hook&loop strap. In the dark the lamp switches automatically from daytime running light to low beam. The remote control can then be used to switch between low and high beam and is mounted to the handlebar with the Peppi holder.
C14 Mag (International)
€125.00*
The C14 Mag is the first taillight with an innovative magnetic mount. The 45 lumen rear light has a brake light and a brightness sensor. In contrast to the StVZO-approved version, the international version is equipped with two additional light modes: flashing and pulse mode.The C14 Mag is inserted into the holder between the saddle rails and held there with pure magnetic force. Like the housing, it's made of CNC-milled aluminium. The integrated battery is fully charged within 3 hours with the included magnetic charging cable and has a runtime of up to 22 hours. The C14 Mag impresses with its homogeneous light characteristic and guarantees all-round good visibility - even from the side. Like all Lupine lamps, the C14 Mag is waterproof and impact-resistant according to IP67 and IK09. The minimum distance between saddle and saddle rails for mounting is 21mm. For mounting on carbon saddles two longer retaining screws are included in the delivery. The C14 Mag is compatible with all standardised standardised seat post spacing (approx. 35mm).
SL F for E-Bikes
€350.00*
Motor:
Yamaha
|
Handlebar Diameter:
35 mm
The SL F for e-bikes with up to 1300 lumen high beam and StVZO approval.900 lumens low beam ensure optimum visibility without blinding oncoming traffic. Out of town the high beam illuminates the road or trail for up to 210m. As soon as the brightness sensor detects darkness, the SL F automatically switches from daytime running light to low beam. At the same time, the high beam can be activated with the remote control, which is connected to the lamphead via a cable and is fastened with a screw next to the handle. The symbols indicate by green or blue light whether you are in low beam or high beam. In addition to the factory setting, the SL F can be set to individual programs. The housing made of black anodised and CNC-milled aluminum is particularly robust, durable and heatresistant.The SL F is mounted securely next to the stem with a clamp mount - also made of CNC-milled aluminum. That way the lamphead sits centrally on the handlebar and ensures optimal illumination. The SL F is also waterproof and impact resistant according to IK09 and IP67. The lamp switches on automatically when the motor of the e-bike is started. To switch it off, press and hold the button on the remote control.____________________________________________________________________________________Note:
Our e-bike lights are supplied with a plug connection and lightcable set since August 2021. Older models are equipped with a long lightcable without a plug. When reordering, please pay attention to the the right lightcable: Lightcable for E-Bikes - motor connection (2.0 & 3.0)
SL F E-Bike Bosch Intuvia/Nyon
€350.00*
Display:
Nyon
The SL F for e-bikes with up to 1300 lumens high beam and StVZO approval. For mounting on a Bosch Intuvia/Nyon display, a bracket is included that replaces the bracket clip underneath the display. The 900 lumens low beam ensures optimum visibility without blinding oncoming traffic. Out of town, the high beam illuminates the road or trail for up to 210m. As soon as the brightness sensor detects darkness, the SL F automatically switches from daytime running light to low beam. At the same time, the high beam can be activated with the remote control. It is connected to the lamp head via cable and is mounted with a screw next to the handle. The symbols indicate by green or blue light whether the light runs in low beam or high beam. In addition to the factory setting, the SL F can be set to individual programs. The housing made of black anodised and CNC-milled aluminum is particularly sturdy, durable and heat-resistant. The SL F is also waterproof and impact-resistant according to IK09 and IP67.
SL Nano for E-Bikes
€228.00*
Handlebar Diameter:
31.8 mm
|
Highbeam:
with Highbeam | Wired Remote
The SL Nano for e-bikes with up to 1.000 lumens high beam and StVZO approval.The 700 lumen low beam illuminates the road without dazzling oncoming traffic, while the high beam has a range of 250 metres. You can switch back and forth between low and high beam using the Bluetooth or optional wired remote control. The version without high beam comes without a remote control. The 52g lamp head is firmly mounted next to the stem with the CNC-machined aluminum holder and thus sits centrally on the handlebars. The housing, also made of CNC-milled and black anodised aluminum, is particularly robust, durable and heat-resistant.The SL Nano is also waterproof and impact-resistant to IK09 and IP67. The light switches on automatically when the motor of the e-bike is switched on. To switch off, press and hold the button on the remote control for approx. 2 seconds._________________NOTE:The light cable of the SL Nano has a Shimano connection. Please order the light cable with the appropriate motor connection: Light cable for e-bikes - motor connection (2.0 & 3.0)
Variants from €148.00*
SL Nano Newmen
€148.00*
Highbeam:
without Highbeam
The SL Nano for Newmen stems with 700 lumen low beam and StVZO approval. Without high beam, daytime running light and brightness sensor.Instead of the usual handlebar mount, the lamphead is held in position by a bracket between the handlebar and the stem clamps. The housing, also made of CNC-milled and black anodised aluminium, is particularly sturdy, durable and heat-resistant.The SL Nano is also waterproof and impact-resistant according to IK09 and IP67.
__________________________________________________________________________________
Note:
Compatible with all Evolution 31.4 stems by Newmen. The light cable of the SL Nano is compatible with Shimano motors. Installation on Bosch, Brose or Yamaha motors requires an additional lightcable with motor connection.
Find more Newmen accessiores> here <
SL Nano E-Bike Classic
€228.00*
Highbeam:
with Highbeam
The SL Nano Classic for E-Bikes with StVZO-approval to mount on the forkcrown. 700 lumens low beam light up the street without blinding oncoming traffic. The 1000 lumens high beam has a range of up to 250 m. The remote control is connected to the 52g light lamphead via cable, it allows you to switch between low beam and high beam. The symbols light green or blue, depending on the mode that is active. The housing is made from CNC-milled aluminum and therefore especially sturdy, longliving and heat resistant. The SL Nano is also waterproof and impact resistant according to IK09 and IP67. The lamp switches on automaticallywhen the motor of the e-bike is started. To switch it off, press and hold the button on the remote control._________________NOTE:The light cable of the SL Nano has a Shimano connection. Please order the light cable with the appropriate motor connection: Light cable for e-bikes - motor connection (2.0 & 3.0)
Variants from €148.00*
SL Nano E-Bike Bosch Intuvia/Nyon
€277.00*
Display:
Nyon
|
Highbeam:
with Highbeam | Bluetooth Remote
The SL Nano for e-bikes for mounting on a Bosch Intuvia or Nyon display. You can choose between the versions with Bluetooth remote control, wired remote control and without remote control. The SL Nano has a 700 lumen low beam and up to 1,000 lumen high beam (the version without remote control only has a low beam). To mount the light, the lower left clamp of the Bosch display holder is replaced by the one for the SL Nano holder. Intuvia holder: compatible with the Bosch Intuvia and 1st generation Nyon.Nyon holder: compatible with the 2nd generation Bosch Nyon (from 2020)._________________NOTE:The light cable of the SL Nano has a Shimano connection. Please order the matching light cable with motor connection for Bosch: Light cable for e-bikes - motor connection (2.0 & 3.0)
Variants from €148.00*
Alpha
€1,090.00*
Handlebar Diameter:
31.8 mm
The new Alpha with stunning 8600 lumens is the improved version of the most powerful bike light we have ever built. With a range of up to 500 metres, it illuminates the trail perfectly and turns every bike into the ultimate nighttime racing machine.The Alpha owes its brightness to the new XML-3 LEDs and the revised heat connection. Thus, the current Alpha is not only brighter but also maintains its performance significantly longer than before.With the included remote control, you can easily switch between the different light levels and control them via app. The LED bar on the back of the lamp indicates the lightmode on which the Alpha is running.The 6.9 Ah battery of the Alpha can be attached to the frame with the included hook&loop strap. With the SmartCore function, the battery shows how much capacity is left, but also has several signal light functions. The 14.4V battery was specially developed for the Alpha and is the only Lupine battery that is not compatible with any other lamphead.Like all lamps, the Alpha is waterproof and impact resistant according to IP67 and IK09.On request, the lamp head is also available with two threads.
Alpha Helmetlight
€1,080.00*
The new Alpha with stunning 8600 lumens is the improved version of the most powerful lamp we have ever built. With a range of up to 500 metres, it illuminates its surroundings perfectly and brings light into the dark in every situation. The Alphas brightness is increased due to the revised heat connection, which improves the dimming behaviour and allows it to run at full power for longer than before. With the help of the included remote control, you can easily switch between the different light levels and control them via app. The LED bar on the back of the lamp indicates the lightmode on which the Alpha is running. The 6.9 Ah battery of the Alpha is carried in the backpack with the included extension cable. With the SmartCore function, the battery shows how much capacity is left, but also has several signal light functions. The 14.4V battery was specially developed for the Alpha and is the only Lupine battery that is not compatible with any other lamphead.As all Lupine lamps, the Alpha is waterproof and shock resistant according to IP67 and IK09.On request, the lamp head is also available with two threads.
Blika All-in-One
€460.00*
Headband:
Black
The Blika with 2400 lumens in a practical All-in-One-Set. Choosing between head- or helmetlamp is no longer necessary here.Cable length at lamphead approx. 25cm.The packet contains the lamphead, headband, helmetmount, battery, bluetooth remote control, charger and instructions.Due to the FrontClick system, the lamphead can easily be switched from headband to helmet (with air vents) and vice versa.The 3.5 Ah battery is worn by the FastClick system directly on the headband or helmet. The SmartCore functionshows how much capacity is left in the battery, provides a signal light feature an has improved battery management.
Piko All-in-One
€400.00*
Headband:
Black
The Piko with 2100 lumens in a practical All-in-One-Set. Choosing between head- or helmetlamp is no longer necessary here.Cable length at lamphead approx. 25cm.The packet contains the lamphead, headband, helmetmount, battery, bluetooth remote control, charger and instructions.Due to the FrontClick system, the lamphead can easily be switched from headband to helmet (with air vents) and vice versa.The 3.5 Ah battery is worn by the FastClick system directly on the headband or helmet. The SmartCore functionshows how much capacity is left in the battery, provides a signal light feature an has improved battery management.
Penta Headlamp
€150.00*
Colour Temperature:
4500 Kelvin (neutral white)
The Penta is a compact headlamp with up to 1100 lumens, diffuse camping light, two red lights with different beam characteristics and numerous lighting functions. The housing of the Penta is made of black anodised aluminium. Two buttons on the upper side of the lamp allow easy control of all lighting functions. The lamp has an integrated battery and can be charged via USB-C.
Note: The optional color temperature "neutral white" gives the Penta a slightly warmer light. Warmer light is especially suitable for use in snow and fog, while the colder "daylight" appears subjectively brighter and helps you stay awake longer.
Piko Helmetlight
€384.00*
Battery:
25 Wh / 3.5 Ah SmartCore
|
Bluetooth:
with Bluetooth Remote Control
The Piko helmetlamp with powerful 2100 lumens and diffuse reading light. With the help of the FrontClick system, you can mount the lamphead on the helmet in a second and change it easily without tools. The helmet holder for air vents is threaded through the helmet with the straps and the holder plate is placed on the top of the helmet. The FastClick holder for the battery is mounted on the back of the helmet. The battery is pushed into the holder and clicks into place. Due to its size and weight, the 6.9 Ah battery is connected to the lamphead via an extension cable and stored in the backpack. The SmartCore batteries have a capacity indicator and several signal light functions. With the optional Bluetooth remote control, you can easily control the lamp wirelessly at the touch of a button without having to take your hands off the handlebar. At the same time, you can use the Lupine Light Control 2.0 app to program and control the Piko according to your preferences. Like all Lupine lamps, the Piko is waterproof and impactresistant according to IK09 and IP67.________________________________________________________________________________Note:Neither Bluetooth nor App can be retrofitted to the Piko. Cable length at the head approx. 25cm.
Variants from €353.00*
Piko Headlamp
€384.00*
Battery:
25 Wh / 3.5 Ah SmartCore
|
Bluetooth:
with Bluetooth Remote Control
|
Headband:
Black
The Piko with 2100 lumens, diffused reading and camping light, Bluetooth remote control and app.The lamphead comes with the Lupine FrontClick system and can be easily converted to a helmet or anotherheadband. The aluminum housing has improved thermal management for maximum efficiency. The Piko offers a diffused light function, six different light levels (0.3W/50 lumens - 20W/2100 Lumen), SOS, RVLR as well as alpine emergency signal. Cable length at lamphead approx. 25cm.The battery is also attached to the headband by the FastClick system. Here you can choose between HardCase and SmartCore batteries. Because of its size and weight, the large 6.9 Ah battery is stowed in the backpack.Instead of a FastClick mount, the headband here has a cable guide in the back. As all Lupine lamps, the Piko is both water- and impact resistant according to IP67 and IK09.___________________________________________________________________________________
Note: If Bluetooth is selected, the lamp is delivered with a Bluetooth remote control and the option to use theLupine Light Control App. Neither Bluetooth nor app can be retrofitted.
Variants from €353.00*
Blika Helmetlight
€401.00*
Battery:
25 Wh / 3.5 Ah SmartCore
|
Bluetooth:
without Bluetooth
The Blika as a helmet lamp with 2400 lumens. The FrontClick system allows a quick change of the lamp head to another helmet or headband (not included). The battery is worn by FastClick system directly on the helmet and can be changed in a few simple steps. The 6.9Ah battery is used with extension cable and stowed in jacket pocket or backpack. With the SmartCore function, the battery shows at the touch of a button how much capacity is still in it, but also has several signal light functions. Cable length at lamphead approx. 25cm.____________________________________________________________________________________Note: If Bluetooth is selected, the lamp is delivered with a Bluetooth remote control and the option to use theLupine Light Control App. Neither Bluetooth nor app can be retrofitted.
Variants from €374.00*