SmartCore battery with LED display with a capacity of 6.9 Ah/50Wh.This 240g battery can be used with all our battery lamps exept Alpha. A short and a long hook&loop strap with anti-slip coating are included for attaching the battery to the bicycle frame, for example.Dimensions: 79 x 41 x 48mm. Cable length at battery approx. 12cm.
FrontClick helmet mount with 3M adhesive pad for mounting on full-face, ski and safety helmets.The helmet holder has a height of 8.5mm (incl. adhesive pad).
The FrontClick helmet mount with hhok&loop for helmets with ventilation slots.The straps are simply fed through the ventilation slots and the lamp is simply clicked into the holder. An EPDM pad ensures a non-slip grip on the helmet.
With the cableguides, the lightcable can be attached to the helmet. Because of the soft adhesive pad, it stays on straight and also slightly cuved surfaces.
SmartCore battery with LED display with a capacity of 13.8 Ah/99Wh.This battery weighs 430g and can be used with all our battery lamps. For attaching the battery e.g. to the bicycle frame, a short and a long Hook&loop strap with anti-slip coating are included. Dimensions: 146x41x48 mm. Cable length at battery approx. 12cm.
The FrontClick handlebar holder completes our FrontClick quick change system and allows a quick and tool-less mounting of all FrontClick lamps (except Alpha) on the handlebars. The holder itself is made of glass fiber reinforced polyamide and is fixed to the handlebars with two screws. Distance between the clamps: 50mm
With the USB Charger, Lupine batteries with 7.2V system (except the Alpha battery) can be charged with up to 1.5A charging current on end devices with a USB connection. For example, on a PC or via the USB power supply of a smartphone - also suitable for solar panels.
Peppi V5 XL handlebar mount with EPDM insert for best grip, compatible with all Lupine remote controls.Maximum Bar Diameter: 32 mmWidth: 16.4 mmStrap Length: 85 mm
Lupine Spacer with GoPro mount: 10mm high, inner diameter: 1 1/8 inches, aluminum black anodized, incl. M4 locking screw.Not compatible with the original GoPro mount. An adapter is also required for lamp mounting.
Peppi V5 handlebar mount with EPDM insert for best grip, compatible with all Lupine remote controls.Maximum Bar Diameter: 22 mmWidth: 13.4 mmStrap Length: 62 mm
To put the bluetooth remote control at your wrist or backpack strap. If you want to put th remote control on a handlebar, the Peppi V5 is the better choice.
SmartCore battery with LED display with a capacity of 10.0 Ah/70Wh.This 350g battery can be used with all our battery lamps exept Alpha.For attaching the battery e.g. to the bicycle frame, a short and a long hook&loop strap with anti-slip coating are included. Dimensions: 157x52x31 mm. Cable length at battery approx. 12cm.
New generation, breathable material and FrontClick-mount for Neo, Piko, Blika, Wilma and Betty. Lamphead is mounted via FrontClick, backpart is suitable for all FastClick batteries but can be re-equipped with a cable routing to lead your battery in your backpack.
Bluetooth remote control with one button to control our head- or helmetlamps Piko, Wilma & Betty.It can be attached to the handlebar using the Peppi holder or with the wristbandholder, e.g. on the wrist or backpack straps.Only compatible with already bluetooth-enabled lamps. Supplied with button cell, holder not included.
Flexmount quick release for attaching a lamphead to bars with a suitable diameter.It is made of CNC-milled and then black anodised aluminium. The rubber pad prevents scratches and ensures a firm hold on the handlebar.Distance from the mounting hole of the bracket screw to the bracket edge minimum 27mm, maximum 40mm, clamp width 8mm.Suitable for the models Neo, Piko, Blika, Wilma, Betty, SL Mono, SL Nano AF, SL AF, SL Minimax AF, SL AX.
Universal GoPro mount: Thanks to the slotted hole (10.6mmx6.2mm), the holder can be mounted on just about any hole and creates a GoPro mount anywhere you want it.
Charger One for charging our Li-Ion batteries with 7.2V system (not suitable for the Alpha battery). The charger shows information about the charging status such as voltage and charged amps via the display.With the 12V adapter, the Charger One can be used on the car cigarette lighter. The Charger One is controlled by a microprocessor and has different charging and discharging functionswhich can be selected manually:1. Li-ion charging program (default program; 0.1 to 2.5A) - to charge the battery2. Li-Ion discharge program (0.1 to 0.5A) - to discharge the battery. (Do not store batteries empty)3. Discharge and charge program - full charge after previous discharge4. 50% storage program - charge the battery to 50% (for storage)
Hardcase battery without LED display with a capacity of 6.9 Ah/50Wh.This 240g battery can be used with all our battery lamps. A short and a long hook&loop strap with anti-slip coating is included in the delivery for attaching the battery to the frame.Dimensions: 79x41x48 mm. Cable length at battery approx. 12cm.
Betty FrontClick mount for attaching the lamp head to a headband or helmet mount.With the FrontClick system, a quick, tool-free change of the lamp from the helmet to the headband is possible.The matching FrontClick counterpart is required for mounting.
Cable for the USB Two with plug connection. Available with Apple Lightning connector, micro USB or USB C.The USB Two is connected between the battery and the lamphead and offers the possibility to charge the smartphone while riding via the battery.
Hook&Loop strap for our FrontCLick mounts to fasten on helmets with ventilation slots.Compatible with all FrontClick helmet mounts and older generation Neo/Piko/Blika helmet holders.
Betty quickrelease for mounting on bars with fitting diameter. It is made of CNC-milled, black anodised aluminium. The rubber pad prevents scratches and ensures a firm hold.Distance from the mounting hole of the holderscrew to the edge approx. 30mm, clamp width 8mm.
Lights with FrontClick mount can be attached to the side of the helmet or directly to the strap of the MTB goggle or ski goggles with this holder.Four silicone pads prevent slipping on the helmet and a special nub structure on the inside promises the best hold on the strap.We recommend not using the holder with the Alpha for weight reasons. Maximum strap width: 42 mm
If an quickrelease mount is used, the filler plug does protect the lights second thread.The filler plug is already delivered with all quickrelease mounts!
We will not be in the office on May 10 due to the bridge day. If you have any questions about orders, please send an e-mail to info@lupine.de. Our service will be available again as usual on Monday.
This website uses cookies to ensure the best experience possible. More information...
