We will be on holiday from 24 December to 1 January. Parcels will not be dispatched during this time and our customer service will also be enjoying the holidays. We'll be available again as usual from 2 January. In the meantime, please send us your questions by email to info@lupine.de.
We wish you happy holidays and a happy new year.
FrontClick helmet mount with 3M adhesive pad for mounting on full-face, ski and safety helmets.The helmet holder has a height of 8.5 mm (incl. adhesive pad).
The FrontClick helmet mount with Hook & Loop for helmets with ventilation slots.The straps are simply fed through the ventilation slots and the lamp is simply clicked into the holder. An EPDM pad ensures a non-slip grip on the helmet.
With the cableguides, the lightcable can be attached to the helmet. Because of the soft adhesive pad, it stays on straight and also slightly cuved surfaces.
Piko FrontClick mount for attaching the lamp head to a headband or helmet mount with FrontClick counterpart.With the FrontClick system a quick tool-free change of the lamp from the helmet to the headband is possible.The mount screws (item i174) are required for installation!
The new mount perfectly places the Rotlicht below the saddle. By the push of a button you easily unlock it and charge your Rotlicht if necessary.
With the mount you get a small hexkey, which you need for the initial setup.
Cable connector for joining together an already separated light cable for e-bikes.The included foam tunnel prevents any rattling in the frame.Waterproof connection due to grease filling.
Battery helmetmount for attachment to helmets with air vents. Suitable for all FastClick batteries (2.0Ah and 3.5Ah) in combination with the Neo, Piko or Blika lampheads. To mount, pass the hook&loop tape through the ventilation slots, thread the ends through the eyelets on the holder and fasten.
The FrontClick barmount completes our FrontClick quick change system and allows a quick and tool-less mounting of all FrontClick lamps (except Alpha, Betty and Penta) on the handlebar.The mount itself is made of glass fiber reinforced polyamide and is fixed to the handlebar with two screws.Distance between the clamps: 50mm
Tail light cable for installing the C14 on an e-bike-motor.Including lightcable connector set with sealing gel for water resistance. Cable-length: 13 cm
FastClick battery helmet holder incl. 3M Duallock. With the 3M Duallock, the battery holder can be easily removed from the helmet at any time. The battery itself is simply, securely and quickly clicked into the shell.
With the USB Charger, Lupine batteries with 7.2V system (except the Alpha battery) can be charged with up to 1.5A charging current on end devices with a USB connection. For example, on a PC or via the USB power supply of a smartphone - also suitable for solar panels.
With the self-adhesive cable guide the C14 light cable can be led cleanly from the seat tube to the engine of your e-bike. The soft 3M adhesive pad ensures that the clamp can be easily attached to slightly curved surfaces. The cable guide is also ideal for attaching the cable of the SL remote controls directly to the handlebars.
FrontClick headband in various colours with FastClick system. Suitable for Neo, PentaPro, Piko and Blika lampheads.If the headlamp is used with a 6.9 Ah battery (or larger), the battery holder at the back of the head is replaced by the cable guide and the battery is stored in the backpack.If necessary the top band can also be separated from the headband.
The battery holder can be mounted instead of the bottle holder. Our HardCase and SmartCore batteries can now be mounted without hook&loop strap.Depending on the position of the bottle cage, the use of an extensioncable may be necessary.
Quickrelease mount for the models Neo, Piko and Blika for mounting on bars with fitting diameter. It is made of CNC-milled, black anodised aluminium.The rubber pad prevents scratches and ensures a firm hold.Distance from the mounting hole of the holderscrew to the edge approx. 20mm, clamp width 8mm.
Peppi V5 XL handlebar mount with EPDM insert for best grip, compatible with all Lupine remote controls.Maximum Bar Diameter: 32 mmWidth: 16.4 mmStrap Length: 85 mm
Front plate for the Neo/PentaPro/Piko/Blika headband with FrontClick mount.An existing front plate can simply be unthreaded and replaced with the FrontClick plate.A suitable FrontClick lamp mount must be ordered separately!
Lupine Spacer with GoPro mount: 10mm high, inner diameter: 1 1/8 inches, aluminum black anodized, incl. M4 locking screw.Not compatible with the original GoPro mount. An adapter is also required for lamp mounting.
Peppi V5 handlebar mount with EPDM insert for best grip, compatible with all Lupine remote controls.Maximum Bar Diameter: 22 mmWidth: 13.4 mmStrap Length: 62 mm
Coated battery strap with a length of 30cm suitable for pipes with a diameter of up to 75 mm.A silicone anti-slip coating on the inside of the Velcro strap prevents the battery from slipping.
To put the bluetooth remote control at your wrist or backpack strap. If you want to put th remote control on a handlebar, the Peppi V5 is the better choice.
New generation, breathable material and FrontClick-mount for Neo, PentaPro, Piko, Blika, Wilma and Betty.Lamphead is mounted via FrontClick, backpart is suitable for all FastClick batteries but can be re-equipped with a cable routing to lead your battery in your backpack.
GoPro adapter for mounting the SL F and SL AF on an existing GoPro holder.Mounting recommendations (see product pictures):S: horizontal to the lamp headM: vertical to the lamp headL: completely flexible (vertical or horizontal)Arm lengths (rear stop to center of screw):S: approx. 22 mmM: approx. 35 mmL: approx. 42 mm