Cable connector for joining together an already separated light cable for e-bikes.The included foam tunnel prevents any rattling in the frame.Waterproof connection due to grease filling.
With the self-adhesive cable guide the C14 light cable can be led cleanly from the seat tube to the engine of your e-bike. The soft 3M adhesive pad ensures that the clamp can be easily attached to slightly curved surfaces. The cable guide is also ideal for attaching the cable of the SL remote controls directly to the handlebars.
Adjustable aluminium bracket for mounting all Lupine lights on the handlebars of your e-bike. Adjustment range from 28mm to 40mm arm length (from handlebar to hole centre).Perfect for thicker stems, Bosch Smartphone Hub or bike computer.
Peppi V5 XL handlebar holder with EPDM insert for best grip, compatible with all Lupine remote controls.Maximum bar diameter: 32mm, width: 16.4mm, strap length: 85mm.
Peppi V5 handlebar holder with EPDM insert for best grip, compatible with all Lupine radio remote controls.Maximum bar diameter: 22mm, width: 13.4mm, strap length: 62mm.
Connector for joining together an already separated light cable for e-bikes.Waterproof connection due to gel insert.Preferably use the Y connector if a second device (e.g. C14 tail light) is to be connected to a single light cable.
The Bluetooth remote control for all our SL bike lights with StVZO approval.It has two buttons. The large button with headlight symbol is used to activate the high beam in the dark, the small button to dim the low beam.Compatible with Peppi V5, Peppi V5 XL and the wristband holder for remote controls. Only compatible with already bluetooth-capable lamps.Supplied with button cell but without holder.
If an quickrelease mount is used, the filler plug does protect the lights second thread.The filler plug is already delivered with all quickrelease mounts!
Type CR2032 button cell for Bluetooth remote controls.Please do not force into older radio transmitters, the previous model is not designed for the thicker button cell.
The increase enlargement for handlebars with a diameter of 31.8 mm enables the use of a quickrelease in size 35 mm on the thinner tube diameter.Suitable with every quickrelease or barmount.
Wired remote control with high beam in various lengths for out e-bike lights (SL F, SL X and SL Nano). Cable length is measured from lamp to remote control. The remote control is 14 mm wide.
_________________________________________________________________________________
Note:Not compatible with the bluetooth version of the SL Nano.In combination with the Classicmount, a minimum length of 67cm is required.
Quickrelease mount for SL Nano for mounting on bars with fitting diameter. It is made of CNC-milled, black anodised aluminium.The rubber pad prevents scratches and ensures a firm hold.Distance from the mounting hole of the holderscrew to the edge approx. 15 mm, clamp width 7 mm.
Short light cable with motor connection and plug connector for mounting an e-bike light on a light cable already laid in the frame. Suitable for lightcable extension 2.0 & 3.0.Please ensure the correct plug connection -> see note._________________________________________NOTE: Light cable 1.0: Lamp models up to August 2021 are equipped with a continuous light cable without a plug connection.Light cable 2.0: Since August 2021, all light cables on e-bike lights have a plug connection on the light cable, as well as a small light cable with the matching motor connection.Light cable 3.0: Since March 2024, the plug connection of the e-bike light cable has been converted to a 2-pin coaxial plug connection.
With the Classicmount, the SL Nano can be mounted on fork crowns with a hole. An M6 x 35 screw is supplied for mounting.Combined with the classicmount, the wired remote control should have a minimum length of 67cm.
The Knipex wire stripper strips cables without manual adjustment. The pliers are already adjusted to our e-bike cables (and can still be used on any other type of cable). Compact, handy and lightweight tool for common cable cross sections and insulation materials.Housing: plastic, glass fiber reinforcedBlade: special tool steel, oil-hardened, replaceable
SL Nano lamp mount for aero handlebars from Canyon (Canyon CP10/CP12 Aerocockpit). Suitable for mounting the SL Nano (SL Nano AF) with or without bike computer directly under your aero handlebar. The black anodized aluminum holder is mounted with two screws directly below the handlebar.Developed in collaboration with Canyon, compatible with all Canyon aero cockpits except H11/H36.
SL Nano mount for the second generation of the Bosch Nyon display (Nyon 2020). For mounting, the holder halves below the handlebar are replaced by the SL Nano holder.Note: The SL Nano can only be mounted centrally in front of the display with this holder.
Stem clamps for mounting the SL Nano Newmen on Evolution 318.3 stems of Newmen. With these stem clamps the SL Nano can be mounted on existing Newmen stems.
SL Nano holder made of CNC-milled aluminium for mounting on the Bosch Kiox/Kiox300 display. For mounting, the holder is clamped between the handlebar bracket and the display mounting plate.
E-bike light cable extension for mounting all e-bike front lights with plug connection. Order the appropriate connection cable separately for the motor connection:Motor Connection Cable for E-Bikes (Frontlight)________________________________________NOTE:Light cable 1.0: Lamp models up to August 2021 are equipped with a continuous light cable without plug connection. Light cable 2.0: Since August 2021, all light cables on e-bike lights have a plug connection on the light cable, and a small light cable with the matching motor connection.Light cable 3.0: Since March 2024, the plug connection of the e-bike light cable has been changed to a 2-pin coaxial plug connection.
Housing of the bluetooth remote control SL AF, SL AX, SL Nano AF and SL Nano with bluetooth.Incl. sealing and screws, compatible with Peppi V5 and Peppi V5 XL.
We will not be in the office on May 10 due to the bridge day. If you have any questions about orders, please send an e-mail to info@lupine.de. Our service will be available again as usual on Monday.
This website uses cookies to ensure the best experience possible. More information...