Short light cable with motor connection and plug connector for mounting an e-bike light on a light cable already laid in the frame. Suitable for lightcable extension 2.0 & 3.0.If a long light cable is also required for the frame, this must be ordered separately. Please ensure the correct plug connection -> see note._________________________________________NOTE: Light cable 1.0: Lamp models up to August 2021 are equipped with a continuous light cable without a plug connection.Light cable 2.0: Since August 2021, all light cables on e-bike lights have a plug connection on the light cable, as well as a small light cable with the matching motor connection.Light cable 3.0: Since March 2024, the plug connection of the e-bike light cable has been converted to a 2-pin coaxial plug connection.
E-bike light cable extension for mounting all e-bike front lights with plug connection. Please select the appropriate extension cable and order the small light cable with motor connection separately: Light cable for e-bikes - motor connection (2.0 & 3.0)________________________________________NOTE:Light cable 1.0: Lamp models up to August 2021 are equipped with a continuous light cable without plug connection. Light cable 2.0: Since August 2021, all light cables on e-bike lights have a plug connection on the light cable, and a small light cable with the matching motor connection.Light cable 3.0: Since March 2024, the plug connection of the e-bike light cable has been changed to a 2-pin coaxial plug connection.
E-bike light cable extension for mounting all e-bike front lights with plug connection. Please select the appropriate extension cable and order the small light cable with motor connection separately: Light cable for e-bikes - motor connection (2.0 & 3.0)________________________________________NOTE:Light cable 1.0: Lamp models up to August 2021 are equipped with a continuous light cable without plug connection. Light cable 2.0: Since August 2021, all light cables on e-bike lights have a plug connection on the light cable, and a small light cable with the matching motor connection.Light cable 3.0: Since March 2024, the plug connection of the e-bike light cable has been changed to a 2-pin coaxial plug connection.
Wired remote control in a length of 29cm for our e-bike lighting SL MiniMax. Cable length measured from the lamp to remote control. The inner diameter of the clamp is 22mm.The button is mounted uncomplicated next to the handlebar grip and fixed with a screw.
Lamp holder for the second generation of the Bosch Nyon display (Nyon 2020). For mounting, the pieces of the mount below the handlebars are replaced by the mount for the lamphead.Suitable for SL X and SL MiniMax.Note: The SL MiniMax comes with only one thread as standard, therefore the article for the doublethread upgrade must also be ordered (see "Recommended").
Connection set for rejoining an already separated light cable for e-bikes.The enclosed foam tunnel prevents any rattling in the frame. The two-pole cable connection is waterproof due to its grease filling.
The Knipex wire stripper strips cables without manual adjustment. The pliers are already adjusted to our e-bike cables (and can still be used on any other type of cable). Compact, handy and lightweight tool for common cable cross sections and insulation materials.Housing: plastic, glass fiber reinforcedBlade: special tool steel, oil-hardened, replaceable
Scotchlok Y-connector set for mounting on the e-bike.With the Scotchlok connector, a light cable can be separated and rejoined. If necessary, a second device (e.g. the C14 tail light) can be parallel connected via the Y-connection. Waterproof due to gel insert.
Matt black retaining screws for mounting the lamphead on the FrontClick holder or quick release/clamp. Suitable for: Neo, Piko, Blika, Wilma, SL Mono, SL Nano, SL Nano AF, SL F, SL AF, SL MiniMax, SL MiniMax AF
Adjustable aluminium bracket for mounting the SL/SLF on the handlebars of your e-bike. Adjustment range from 28mm to 40mm arm length (from handlebar to hole centre). Perfect for thicker stems, Bosch Smartphone Hub or bike computer. Handlebar diameter chooseable: 31.8mm/35mm
With the self-adhesive cable guide the C14 light cable can be led cleanly from the seat tube to the engine of your e-bike. The soft 3M adhesive pad ensures that the clamp can be easily attached to slightly curved surfaces. The cable guide is also ideal for attaching the cable of the SL remote controls directly to the handlebars.
Together with this increase diameter you can mount a 31.8mm quickrelease or barmount on your 25.4mm handlebar. Compatible with every quickrelease or barmount.Material: PA 12Print method: SL S