SmartCore Akku mit LED Anzeige mit einer Leistung von 3.5 Ah/25Wh.Diesen 120g leichten Akku empfehlen wir für unsere Modelle Neo, Piko und Blika, grundsätzlich ist aber jeder Akku mit jedem Lampenkopf kompatibel. Durch einmaliges Drücken des Tasters zeigt der SmartCore Akku sowohl optisch als auch akustisch den Ladestand an.Der Akku verfügt außerdem über zwei verschiedene Signalllichtfunktionen. Dafür den Knopf zweimal drücken für das Dauerlicht,bzw. dreimal für das Lauflicht. So ist die optimale Sichtbarkeit - auch von hinten - gewährleistet.Mit dem FastClick System lässt sich der Akku am Helm oder Stirnband binnen Sekunden wechseln. Maße: 72x40x22 mm. Kabellänge am Akku ca. 12cm.
Der FrontClick-Helmhalter mit Klettmontage für Helme mit Lüftungsschlitzen. Die Klettbänder werden hierbei einfach durch die Lüftungsschlitze geführt und die Lampe einfach in den Halter eingeklickt. Eine EPDM Auflage sorgt für einen rutschfesten Halt am Helm.
Der FrontClick Lenkerhalter komplettiert unser FrontClick-Schnellwechselsystem und erlaubt eine schnelle, sowie werkzeuglose Montage aller FrontClick-Lampen am Lenker. Der Halter Selbst besteht aus glasfaserverstärktem Polyamid und wird mit zwei Schrauben am Lenker fixiert. Nicht geeignet für Penta, Betty und Alpha.Schellenabstand: 50mm
Das Wiesel Ladegerät in der 6. Generation mit einer Leistung von 1.9A für unsere Li-Ionen Akkus mit 7.2V System. Die Status-LED leuchtet rot beim Laden und springt auf grün sobald der Akku voll ist. Das Wiesel wird über einen Microprozessor gesteuert und hat eine Eingangsspannung von 100-240V bei einer Frequenz von 50/60Hz._______________________________________________________________________________________Hinweis:Nicht kompatibel mit dem Alpha Akku (14.4V).
Kabelführungen mit Klebepad zur Fixierung des Lampenkabels am Helm. Durch das softe Klebepad lässt sie sich sowohl auf geraden als auch an leicht gewölbten Flächen anbringen.
SmartCore Akku mit LED Anzeige mit einer Leistung von 6.9 Ah/50Wh.Dieser 240g leichte Akku kann mit allen unseren Akkulampen ausgenommen der Alpha verwendet werden. Zum Befestigen des Akkus z.B. am Fahrradrahmen liegt je ein kurzes und ein langes Klettband mit Antirutsch-Beschichtung bei.Maße Akku: 79 x 41 x 48mm. Kabellänge am Akku ca. 12cm.
Mit der Rahmenhalterung können alle FastClick Akkus am Rahmen befestigt werden.Im Lieferumfang enthalten sind zwei Klettbänder mit Antirutsch-Beschichtung aus Schweizer Produktion. Je nach Rohrumfang ist entweder das kurze oder lange Band geeignet.
Akkuhelmhalter zur Befestigung an Helmen mit Lüftungsschlitzen. Geeignet für alle FastClick Akkus (2.0Ah und 3.5Ah) in Kombination mit den Neo, Piko oder Blika Lampenköpfen. Zur Montage das Klettband durch die Lüftungsschlitze führen, die beiden Enden durch die Ösen am Halter fädeln und befestigen.
Schnellspanner für die Modelle Neo, Piko und Blika zur Montage an Stangen mit passendem Durchmesser. Er besteht aus CNC-gefrästem, schwarz eloxiertem Aluminium. Die Gummiauflage verhindert Kratzer und sorgt für festen Halt.Abstand vom Befestigungsloch der Halterschraube zum Halterrand ca. 20mm, Schellenbreite 8mm.
Flexmount Schnellspanner zur Befestigung eines Lampenkopfes an Lenkern mit passendem Durchmesser. Er besteht aus CNC-gefrästem und anschließend schwarz eloxiertem Aluminium. Die Gummiauflage verhindert Kratzer und sorgt für festen Halt am Lenker.Abstand vom Befestigungsloch der Halterschraube zum Halterrand minimum ca. 27mm, maximal ca. 40mm, Schellenbreite 8mm.Geeignet für die Modelle Neo, Piko, Blika, Wilma, Betty, SL Mono, SL Nano AF, SL AF, SL Minimax AF, SL AX.
Hardcase Akku ohne LED Anzeige mit einer Leistung von 3.5 Ah/25Wh.
Diesen 120g leichten Akku empfehlen wir für unsere Modelle PentaPro, Piko und Blika, grundsätzlich ist aber jeder Akku mit jedem Lampenkopf kompatibel.Mit dem FastClick System lässt sich der Akku am Helm oder Stirnband binnen Sekunden wechseln.Maße: 72x40x22 mm. Kabellänge am Akku ca. 12cm.
FastClick Akku Helmhalter inkl. 3M Duallock. Mit dem 3M Duallock kann der Akkuhalter jederzeit einfach vom Helm entfernt werden. Der Akku selbst wird einfach, sicher und schnell in die Schale geklickt.
FrontClick Stirnband in verschiedenen Farben mit FastClick System. Geeignet für Neo, Piko und Blika Lampenköpfe.Wird die Stirnlampe mit einem 6.9 Ah Akku (oder größer) betrieben, wird der Akkuhalter am Hinterkopf durch die Kabelführung ersetzt und der Akku im Rucksack verstaut. Bei Bedarf kann außerdem das Oberkopfband vom Stirnband getrennt werden.
Piko FrontClick Halter zur Befestigung des Lampenkopfes an einem Stirnband oder Helmhalter.Mit dem FrontClick System ist ein schneller, werkzeugloser Wechsel der Lampe vom Helm auf das Stirnband möglich. Für die Montage wird das passende FrontClick Gegenstück benötigt.
Universeller GoPro Halter: Dank des Langlochs (10,6mmx6,2mm) kann der Halter an so gut wie jeder Bohrung montiert werden und schafft eine GoPro-Aufnahme überall da wo du es willst.
Mattschwarze Halterschrauben zur Montage des Lampenkopfes am FrontClick Halter bzw. Schnellspanner/Clamp. Geeignet für: Neo, Piko, Blika, Wilma, SL Mono, SL Nano, SL Nano AF, SL F, SL AF, SL MiniMax, SL MiniMax AF, Penta Pro
Mit dem USB Charger können Lupine Akkus mit 7.2V System (alle außer dem Alpha Akku) mit bis zu 1.6A Ladestrom an Endgeräten mit USB Anschluss aufgeladen werden. Zum Beispiel am PC oder über das USB Netzteil des Smartphones – auch geeignet für Solar Panels.
Wir ist am 10. Mai aufgrund des Brückentages nicht im Büro. Sollten Fragen zu Bestellungen aufkommen, bitte per E-Mail an info@lupine.de wenden. Unser Service ist am Montag wieder wie gewohnt erreichbar.
Diese Website verwendet Cookies, um eine bestmögliche Erfahrung bieten zu können. Mehr Informationen ...