Free shipping worldwide from 250 Euro
Hotline +49 9181 509 490


Available, delivery time 1-3 days

Handlebar diameter
Product number: i4600
Product information "SL X for E-Bikes"
Giant-variant only compatible with the Syncdrive Pro 2.

With its 1800 lumens the SL X for E-Bikes is the most powerful StVZO lamp approved in Germany.

The lamp with daytime running light, low beam and high beam provides glare-free light and visibility in road traffic and
unrestricted visibility off road and on trails. Via the sensor, the SL X automatically switches from daytime running light to
low beam. With the cable remote control it can be switched between low and high beam. The buttons on the remote control
(that was specifically designed for e-bikes) shine green and blue (low and high beam). As all Lupine lamps, the SL X is
water and impact resistant according to IK09 and IP68.

Note: From August 2021, our E-Bike lamps will have a plug connection on the light cable.
Lamp models until August/2021 won't be supplied with a plug connection, please order the appropriate light cable without plug connection here.
Lightcable without plug connection
Lightcable with plug connection

Lightcable with plug connection:
Light cable length 96,5cm (80cm+16,5cm), with the cable on the spotlight gives a total length of 1,33m.

Properties "SL X for E-Bikes"
Bluetooth: with wired remote control
Colour temperature: 6000 Kelvin
Lampholder: Fixed handlebar clamp
Lamptype: E-Bike light
Lumens: 1800 lumens
Lux: 260 Lux
Measurements: 45x85x48 mm
Motor: Bosch, Brose, Shimano
Protection class: IP 09 (impact resistance), IP 68 (water resistance)
Range: 290 m
StVZO-approved: Yes (~K1753)
Voltage range: 5V - 15V
Weight: 170g
Delivery content "SL X for E-Bikes"
  • SL X lamphead
  • Barmount for handlebar
  • Wired remote control
  • Lightcableset with plug connection
  • Screw with 2x o-ring (black)
  • Filler plug
  • Manual
    Compability "SL X for E-Bikes"
    Giant-variants only compatible with Syncdrive Pro 2 engines.

    Check compatibilty >

    0 of 0 reviews

    Leave a review!

    Share your experiences with other customers.

    Lightcable for E-Bikes
    Motor: Bosch
    140 cm light cable for mounting all SL E-bike headlights. Please select the appropriate motor type.

    Variants from €12.00*
    Lightcableset for E-Bikes (plug connection)
    Motor: Bosch | Set: Large
    E-bike light cable set with motor connection for mounting all e-bike front lights with plug connection. Please select the appropriate motor type._____________________________________________________________________________________Hinweis: Lamp models from August 2021 are equipped with a plug connection on the light cable. If a light cable is required for older modelsplease order the appropriate Lightcable without plug connection here.Light cable length 16.5 cm, together with the cable on the headlamp and the light cable in the frame this gives a total length of 1.33m.

    Variants from €11.00*
    Lightcable connector set
    Connection set for rejoining an already separated light cable for e-bikes.The enclosed foam tunnel prevents any rattling in the frame. The two-pole cable connection is waterproof due to its grease filling.

    Scotchlok Y connector
    Scotchlok Y-connector set for mounting on the e-bike.With the Scotchlok connector, a light cable can be separated and rejoined. If necessary, a second device (e.g. the C14 tail light) can be parallel connected via the Y-connection. Waterproof due to gel insert.

    SL X/AX GoPro Adapter 2
    The SL X/AX GoPro adapter for mounting from "below". Perfect in combination with our GoPro Spacer or the GoPro Universal mount.

    SL X Mount Bosch Intuvia/Nyon
    Display: Nyon
    SL X holder for the second generation of the Bosch Nyon display (Nyon 2020). For mounting, the holder halves below the handlebar are replaced by the SL X mount.Note: The SL X can only be mounted centrally in front of the display with this mount.

    SL X Twinfix mount
    SL X Twinfix bracket for the Twinfix system from Syntace. Included  are the matching steel screws for mounting on the stem clamps of the Twinfix. Compatible with SL X and SL AX

    SL X barmount
    Handlebar diameter: 31.8 mm
    Onesided barmount for the SL X, 31.8mm or 35mm diameter

    SL X Mount Bosch Intuvia/Nyon
    Display: Intuvia
    SL X holder for mounting on the Nyon/Intuvia display by Bosch (first generation). For mounting, the holder halves below the handlebar are replaced by the SL X mount.Note: The SL X can only be mounted centrally in front of the display with this mount.

    SL X Canyon Aero mount
    SL X lamp mount for Aero handlebars from Canyon (Canyon CP10 Aerocockpit CF). Suitable for mounting the SL X(SL AX) with or without bike computer directly under your aero handlebar. The black anodized aluminum holder is mounted with two screws directly to the receptacle below the handlebar. Developed in collaboration with Canyon (, compatible with all Canyon aero cockpits except H11/H36.

    SL X Barmount (two-sided)
    Handlebar diameter: 31.8 mm
    Double-sided handlebar holder made of glass fibre reinforced polyamide for mounting the SL X on handlebars with 31.8mm diameter.

    SL X/AX GoPro Adapter
    GoPro adapter for mounting the SL X/SL AX below a Garmin/bike computer. Consists of black anodized aluminum.

    Knipex wire stripper
    The Knipex wire stripper strips cables without manual adjustment. The pliers are already adjusted to our e-bike cables (and can still be used on any other type of cable). Compact, handy and lightweight tool for common cable cross sections and insulation materials.Housing: plastic, glass fiber reinforcedBlade: special tool steel, oil-hardened, replaceable

    SL X Frontcap
    Housing cover for the SL X and SL AX. Can be replaced by the user in a few simple steps.

    SL X screws frontcap
    Spare screws for the front cover of the SL X and SL AX.

    SL X sealing frontcap
    Spare sealing for the SL X and SL AX. Can be replaced by the user in just a few steps.