Free shipping worldwide from 250 Euro
Hotline +49 9181 509 490

SL Nano Bosch for Intuvia/Nyon

€148.00*

Available, delivery time 1-3 days

Display
Highbeam
Product number: i7660
Product information "SL Nano Bosch for Intuvia/Nyon"
The SL Nano for e-bikes for mounting on a Bosch Intuvia or Nyon display.
You can choose between the versions with Bluetooth remote control, wired remote control and without remote control.
The SL Nano has a 700 lumen low beam and up to 1,000 lumen high beam (the version without remote control only has
a low beam). To mount the light, the lower left clamp of the Bosch display holder is replaced by the one for the SL Nano holder. 
Intuvia holder: compatible with the Bosch Intuvia and 1st generation Nyon.
Nyon holder: compatible with the 2nd generation Bosch Nyon (from 2020).
_________________
NOTE:
The light cable of the SL Nano has a Shimano connection. Please order the matching light cable with motor connection for Bosch: Light cable for e-bikes - motor connection (2.0 & 3.0)
Properties "SL Nano Bosch for Intuvia/Nyon"
Colour temperature: 6000 Kelvin
Highbeam: Without highbeam
Lamptype: E-Bike light
Lumens: 700 lumens
Lux: 130 Lux
Measurements: 41x30 mm
Protection class: IP 09 (impact resistance), IP 67 (water resistance)
Range: 230 m
StVZO-approved: Yes (~K1797)
Weight: 52 g
Delivery content "SL Nano Bosch for Intuvia/Nyon"
  • SL Nano lamphead
  • Bosch holder arm for Intuvia/Nyon display
  • Lightcable
  • 1x holder screw with o-ring blue
  • Hex key 3mm
  • Manual

    0 of 0 reviews

    Leave a review!

    Share your experiences with other customers.


    New
    Lightcable extension E-Bikes (3.0)
    Variant: 3.0
    E-bike light cable extension for mounting all e-bike front lights with plug connection. Please select the appropriate extension cable and order the small light cable with motor connection separately: Light cable for e-bikes - motor connection (2.0 & 3.0)________________________________________NOTE:Light cable 1.0: Lamp models up to August 2021 are equipped with a continuous light cable without plug connection. Light cable 2.0: Since August 2021, all light cables on e-bike lights have a plug connection on the light cable, and a small light cable with the matching motor connection.Light cable 3.0: Since March 2024, the plug connection of the e-bike light cable has been changed to a 2-pin coaxial plug connection.

    Variants from €17.00*
    €18.00*
    Lightcable extension E-Bikes (2.0)
    Variant: 2.0
    E-bike light cable extension for mounting all e-bike front lights with plug connection. Please select the appropriate extension cable and order the small light cable with motor connection separately: Light cable for e-bikes - motor connection (2.0 & 3.0)________________________________________NOTE:Light cable 1.0: Lamp models up to August 2021 are equipped with a continuous light cable without plug connection. Light cable 2.0: Since August 2021, all light cables on e-bike lights have a plug connection on the light cable, and a small light cable with the matching motor connection.Light cable 3.0: Since March 2024, the plug connection of the e-bike light cable has been changed to a 2-pin coaxial plug connection.

    €17.00*
    Lightcable connector set
    Connection set for rejoining an already separated light cable for e-bikes.The enclosed foam tunnel prevents any rattling in the frame. The two-pole cable connection is waterproof due to its grease filling.

    €2.00*
    Lightcable for E-Bikes - motor connection
    Motor: Bosch
    Short light cable with motor connection and plug connector for mounting an e-bike light on a light cable already laid in the frame. Suitable for lightcable extension 2.0 & 3.0.If a long light cable is also required for the frame, this must be ordered separately. Please ensure the correct plug connection -> see note._________________________________________NOTE: Light cable 1.0: Lamp models up to August 2021 are equipped with a continuous light cable without a plug connection.Light cable 2.0: Since August 2021, all light cables on e-bike lights have a plug connection on the light cable, as well as a small light cable with the matching motor connection.Light cable 3.0: Since March 2024, the plug connection of the e-bike light cable has been converted to a 2-pin coaxial plug connection.

    €17.00*
    SL Nano mount Bosch Kiox
    SL Nano holder made of CNC-milled aluminium for mounting on the Bosch Kiox/Kiox300 display. For mounting, the holder is clamped between the handlebar bracket and the display mounting plate.

    €9.00*
    SL Nano mount Bosch Intuvia/Nyon
    Display: Intuvia
    Holder for mounting the SL Nano to the Nyon (1. generation)/Intuvia display by Bosch. For mounting, the holder halves below the handlebar are replaced by the SL Nano holder.Note: The SL Nano can only be mounted in front of the display with this holder.

    €12.00*
    SL Nano mount Bosch Intuvia/Nyon
    Display: Nyon
    SL Nano mount for the second generation of the Bosch Nyon display (Nyon 2020). For mounting, the holder halves below the handlebar are replaced by the SL Nano holder.Note: The SL Nano can only be mounted centrally in front of the display with this holder.

    €12.00*