Free shipping worldwide from 250 Euro
Hotline +49 9181 509 490

SL F for E-Bikes (with two holding arms)

€350.00*

Available, delivery time 1-3 days

Handlebar diameter
Motor
Product number: i5500
Product information "SL F for E-Bikes (with two holding arms)"

The SL F for e-bikes with up to 1300 lumens high beam, glare-free low beam and daytime running light function. With the included wired remote control you can switch between low and high beam in a flash. The lamp comes including light cable and two holder arms made of fiberglass-reinforced polyamide (please select the appropriate handlebar diameter and motor).

Note: This is the SL F with two threads for mounting with the two included bracket arms or the optional Classic Mount.

Properties "SL F for E-Bikes (with two holding arms)"
Bluetooth: with wired remote control
Lampholder: Fixed handlebar clamp
Lamptype: E-Bike light
Lumens: 1300 lumens
Lux: 110 Lux
Measurements: 49x50x48 mm
Motor: Bosch, Bosch BES3, Brose, Giant, Shimano, Yamaha
Protection class: IP 09 (impact resistance), IP 68 (water resistance)
Range: 210 m
StVZO-approved: Yes (~K1552)
Weight: 100g
Delivery content "SL F for E-Bikes (with two holding arms)"
  • Lamphead SL F
  • 2x holder arm made of polyamide
  • Holder screws
  • Light cable
  • TX6 and TX15
  • Manual
Compability "SL F for E-Bikes (with two holding arms)"

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Lightcable for E-Bikes
Motor: Brose
140 cm light cable for mounting all SL E-bike headlights. Please select the appropriate motor type.

Variants from €12.00*
€14.00*
Lightcableset for E-Bikes (plug connection)
Motor: Bosch | Set: Large
E-bike light cable set with motor connection for mounting all e-bike front lights with plug connection. Please select the appropriate motor type._____________________________________________________________________________________Hinweis: Lamp models from August 2021 are equipped with a plug connection on the light cable. If a light cable is required for older modelsplease order the appropriate Lightcable without plug connection here.Light cable length 16.5 cm, together with the cable on the headlamp and the light cable in the frame this gives a total length of 1.33m.

Variants from €11.00*
€15.00*
Knipex wire stripper
The Knipex wire stripper strips cables without manual adjustment. The pliers are already adjusted to our e-bike cables (and can still be used on any other type of cable). Compact, handy and lightweight tool for common cable cross sections and insulation materials.Housing: plastic, glass fiber reinforcedBlade: special tool steel, oil-hardened, replaceable

€27.00*
Scotchlok Y connector
Scotchlok Y-connector set for mounting on the e-bike.With the Scotchlok connector, a light cable can be separated and rejoined. If necessary, a second device (e.g. the C14 tail light) can be parallel connected via the Y-connection. Waterproof due to gel insert.

€2.00*
Lightcable connector set
Connection set for rejoining an already separated light cable for e-bikes.The enclosed foam tunnel prevents any rattling in the frame. The two-pole cable connection is waterproof due to its grease filling.

€2.00*
SL F barmount
Handlebar diameter: 31.8 mm | Stem: V50 (50-60 mm)
Barmount for mounting the SL F E-bike light permanently to the handlebar.It is made of CNC-milled and black anodised aluminum and compatible with stems of 50-60mm width.

€18.00*
SL F mount (both sided)
Handlebar diameter: 31.8 mm
Two-sided handlebar bracket for mounting the two-thread variant of the SL F on handlebars with 31.8mm diameter. Also compatible with all two-thread variants of the SL S, and SL A and SL AF.Clamp width: 5.3mm

€12.00*
SL F mount Bosch Intuvia/Nyon
Display: Nyon
SL F holder for the second generation of the Bosch Nyon display (Nyon 2020). For mounting, the holder halves below the handlebar are replaced by the SL F holder.

Variants from €12.00*
€15.00*
SL F barmount
Handlebar diameter: 31.8 mm | Stem: Standard (40-50 mm)
Barmount for mounting the SL F E-bike light permanently to the handlebar. It is made of CNC-milled and black anodised aluminum and compatible with stems of 40-50mm width.

€18.00*
SL F/AF GoPro Adapter
Size: M
Recommendation:If the holder is mounted frontally (horizontal), we recommend the "S".For mounting upside-down (vertical), we recommend version"M".The adapter in version "L" allows completely flexible mounting. The lamp head of the SL AF can be rotated completely. Arm length (back stop to middle screw):Version L: approx. 42 mmVersion M: approx. 35 mmVersion S: approx. 22 mm

€15.00*
SL F mount (both sided)
Handlebar diameter: 35 mm
Two-sided handlebar bracket for mounting the two-thread variant of the SL F on handlebars with 35mm diameter. Also compatible with all two-thread variants of the SL S, and SL A and SL AF.Clamp width: 5.3mm

€12.00*