Free shipping worldwide from 250 Euro
Hotline +49 9181 509 490

Rotlicht (international)


Available, delivery time 5-7 days

Product number: i799PH
Product information "Rotlicht (international)"
160 lumen taillight with brightness sensor, brake light, various light modes (continuous light, flashing, pulsing, etc.) and up to five different dimming levels.

The sensor technology with brake light provides additional safety. The waterproof hardware is designed for daily use in wind and rain and easily
withstands temperatures from -25 to 70 degrees celsius. The battery, which is integrated into the taillight, is charged via a micro USB in the back.
A plug protector is attached to the charging socket, so neither dust nor dirt gets inside. The taillight is mounted with the enclosed strap underneath
the bikeseat. Delivery includes a short and a long strap each. They cover a 22 to 55 mm diameter. The excess strap can easily be shortened if necessary.
Properties "Rotlicht (international)"
Colour: Black, Blue, Phantom, Red
Lamptype: Taillight
Lumens: 160 Lumen
Luminous duration: 30 h
Material: CNC-milled, aluminium 6061-T6, shot-peen, hard-anodised
Measurements: 20x32x60 mm
Plug: Mikro USB B
Protection class: IP 09 (impact resistance), IP 68 (water resistance)
StVZO-approved: No
Weight: 55g
Delivery content "Rotlicht (international)"
  • Rotlicht Taillight
  • Rubberstrap long
  • Rubberstrap short
  • Micro-B USB cable

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Seat Rail mount Rotlicht
The new mount perfectly places the Rotlicht below the saddle. By the push of a button you easily unlock it and charge your Rotlicht if necessary. With the mount you get a small hexkey, which you need for the initial setup.

Rotlicht mount for seat rail mount
With the mount, the taillight can be attached to the seat stay holder. If you need to charge it simply loosen the clamp and remove it.Already included in the scope of delivery of the seat rail mount.

Backpack mount Rotlicht (for backpacks)
To install the backpack mount, unscrew the original mount. Make sure the rubber inlay is placed accurately in the plastic part. Attach the new mount by using the original screws.Note: Due to its weight, we do not recommend using the Rotlicht MAX with the Backpack mount.

The USB One can be used to charge devices with an USB charging cable on a Lupine battery (smartphone, red light, Penta, etc).To do this, connect the USB One between the charging cable and the battery.Note:It is not possible to charge a Lupine battery using the combination of USB One, USB Charger and another battery.

USB Charger
With the USB Charger, Lupine batteries with 7.2V system (except the Alpha battery) can be charged with up to 1A charging current on end devices with a USB connection. For example, on a PC or via the USB power supply of a smartphone - also suitable for solar panels.

Rubberstrap long ROTLICHT
13 cm long strap made out of durable EPDM, can be shortened if necessary.One strap already comes with the ROTLICHT itself.

Rubberstrap short ROTLICHT
11 cm long strap made out of durable EPDM, can be shortened if necessary.One strap already comes with the ROTLICHT itself.

Rotlichtcap transparent
The transparent cap does come with four stainless steel screws.

ROTLICHT battery
3 Wh/840 mAh lithium-polymer replacement battery for the red light. The battery can be replaced by the user in a few simple steps.

Rotlicht electronic board "white"
The electronic board can be changed by yourself. You'll need a phillips screwdriver to do that.

Rotlicht electronic board "red"
The electronic board of the ROTLICHT can be changed by yourself.