Welcome to the shop for dealers
Hotline +49 9181 509 490

Classicmount for SL X

€24.00*

Available, delivery time 1-3 days

Product number: i2289
Product information "Classicmount for SL X"

The installation is possible at all forks with hole. To attach the mount a M6 x 35 screw is included.

Note: The wired remote control should have a minimum length of 67cm in combination with the Classicmount.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


SL Nano Classic
Highbeam: With highbeam
The SL Nano Classic for E-Bikes with StVZO-approval to mount on the forkcrown. 700 lumens low beam light up the street without blinding oncoming traffic. The 1000 lumens high beam has a range of up to 250 m. The remote control is connected to the 52g light lamphead via cable, it allows you to switch between low beam and high beam. The symbols light green or blue, depending on the mode that is active. The housing is made from CNC-milled aluminum and therefore especially sturdy, longliving and heat resistant. The SL Nano is also waterproof and impact resistant according to IK09 and IP67. The lamp switches on automaticallywhen the motor of the e-bike is started. To switch it off, press and hold the button on the remote control._________________NOTE:The light cable of the SL Nano has a Shimano connection. Please order the light cable with the appropriate motor connection: Light cable for e-bikes - motor connection (2.0 & 3.0)

Variants from €148.00*
€228.00*
Classicmount SL Nano
With the Classicmount, the SL Nano can be mounted on fork crowns with a hole. An M6 x 35 screw is supplied for mounting.Combined with the classicmount, the wired remote control should have a minimum length of 67cm.

€24.00*
Classicmount SL F
Working for nearly all SL F lights with two threads. The installation is possible at all forks with hole. To attach the mount a M6 x 35 screw is included. Note: Not suitable for SL B Bosch and SL BF.The wired remote control should have a minimum length of 67cm in combination with the Classicmount.

€24.00*
Wired remote control for E-Bikes (Peppi Edition)
Cable length: 67cm | Suitable for: SL F/SL X
Wired remote control on Peppi with high beam in various lengths for our e-bike lights (SL F, SL X and SL Nano). Cable length measured from lamp to remote control.The Peppi enables quick and uncomplicated installation. Despite the possible additional support on Shimano brakes, the button can be mounted close to the handle. With the additionally available Peppi V5 XL, the remote control can also be attached to racing bike handlebars or handlebars with a larger diameter.The width of the Peppi is 13.4mm, the dimensions of the remote control are 20x25x7mm. The remote control can be replaced with the plug on the cable itself. _________________________________________________________________________________ Note:Not compatible with the bluetooth version of the SL Nano.In combination with the Classicmount, a minimum length of 67cm is required.

€25.00*
Wired remote control for E-Bikes
Cable length: 67cm | Suitable for: SL F/SL X
Wired remote control with high beam in various lengths for out e-bike lights (SL F, SL X and SL Nano). Cable length is measured from lamp to remote control. The remote control is 14 mm wide. _________________________________________________________________________________ Note:Not compatible with the bluetooth version of the SL Nano.In combination with the Classicmount, a minimum length of 67cm is required.

€22.00*